Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method : Office Products

Buy Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method: Money Handling Products - ✓ FREE DELIVERY possible on eligible purchases

Folding dies Swedish Wrap Dies Stabilizer dies 3 sizes 1.40, 1.25, 1.10

Swedish Wrap Die Set (3 pcs.) Professionally Made to Last, Coin Ring Tools

These dies are made to do the Swedish Wrap Method. The inside angle is 7 degrees. Also with 4 different sized dies. Die 1 is approximately 1.4 at the top and 1.15 at the bottom. Die 2 is 1.3 at top and 1.05 at bottom. Die 3 is 1.2 at top and .95 at bottom. Die 4 is 1.1 at top and .85 at bottom. SW dies are 1-1/8 tall. These dies are hardened and the inside of the die is polished very smooth.

Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method

Delrin Push Rod Set for Swedish Wrap Dies - Used for making coin

THE ORIGINAL One Swedish Die of your choice for replacement or to

This is the newest *tiny* Swedish Wrap die to compliment my original 3 Swedish Wrap Die Set combo that I personally designed., Use this newest die to

Swedish Wrap TINY KIT (.55 x .9) for all Dime to Quarter-sized Coins for the Smallest Coin Rings, Charms, Pendants and Beads

This is a coin ring die set of 4 dies and 9 push rods. The inside angle is 7 degrees which is much less than that of the fold over reduction dies.

4 SWEDISH WRAP DIES @ 7° FOR COIN RING TOOLS PLUS 9 PUSH RODS

One 1.0 x 1.4 Swedish Wrap Kit for Dollar Sized Coins – Coin Ring

Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods

USAReplacementparts Self Centering Coin Ring Punch Kit and Die Set, Coin Ring Making Tools, Punch and Die Sizes 3/8Inch, 7/16, Rust

One .6 x .9 Swedish Wrap Kit for Quarter and Dime Sized Coins and

USAReplacementparts Self Centering Coin Ring Punch Kit

THE ORIGINAL One Swedish Die of your choice for replacement or to