54mm 3D Printed Thrust Ring Thrust Rings 3D printed plastic thrust ring designed to be bonded to a 54mm O.D. single-use motor casing for motor retention. To use, the nozzle is installed in the casing and epoxy is dispensed into the gap between the nozzle and the case until the level of epoxy rises to just below the end of the case. The thrust ring is then placed over the nozzle and pushed onto the end of the case until fully seated. The inner ring becomes embedded in the epoxy when cured, and the slight angle in the inner ring creates a physical restriction that prevents it from being ejected under pressure. As the thrust ring is pushed onto the case, the inner ring displaces some of the epoxy adhesive upward into the gap between the ring and the nozzle, increasing the length of the bond. Epoxy also flows into the gap between the inner ring and the case. This epoxy is allowed to cure before proceeding to the next (optional) step. Most of the inside length of the outer ring is designed to be slightly larger than the case wh
Katana - 54mm Motor Monster
umikot 3D Models to Print - yeggi
54mm 3-Grain Single-Use EMK™ High Power Experimental Motor Kit
aerotech 3D Models to Print - yeggi
HAMR Motor Adapter - Rocketry Works
aerotech 3D Models to Print - yeggi
3D printed plastic thrust ring designed to be bonded to a 54mm O.D. single-use motor casing for motor retention. To use, the nozzle is installed in
54mm 3D Printed Thrust Ring
51111 Thrust Bearing 55*78*16 Mm ( 1 Pc ) Abec-1 Axial 51111 Ball Bearings 8111 - Shafts - AliExpress
3D Printing - What Are You Printing Today?, Page 38
umikot 3D Models to Print - yeggi
Peak of Flight Newsletter : Apogee Rockets, Model Rocketry Excitement Starts Here
3D printed plastic thrust ring designed to be bonded to a 54mm O.D. single-use motor casing for motor retention. To use, the nozzle is installed in
54mm 3D Printed Thrust Ring
Astrobee 500
Almoravid Spearmen with Shield (black clothes) (standing, ready to thrust spear overhand), The Almoravids, El Cid and the Reconquista, The Crusades--two - ALM-20AD - Metal Toy Soldiers - Products
Peak of Flight Newsletter : Apogee Rockets, Model Rocketry Excitement Starts Here