AllFuel HST 8 Single to Double Wall Pipe Adapter

Use the Stove Pipe Adapter to connect single wall stove pipe to Class-A double wall insulated chimney. Made of 304 stainless steel and painted black to match your stove pipe. Can be painted any color with high temperature paint. Includes 1 Locking Band also painted black. 0.019 in. thick inner and outer walls (17% thicker than our competition) High density 1.18 in.

ALLFUEL HST Stove Pipe Adaptor Single To Double Wall Chimney Pipe

DuraVent 6DVL-12ADJ DVL 12 Double-Wall Adjustable Black Pipe - 6

Consturction Double Wall Insulated Stove Pipe Sheet Metal

Use a tee with clean out cap for through the wall installations to make the 90 degree turn on the outside of the wall. The front opening of the tee connects to the length of Class-A chimney that passes through theWall Thimble. The top opening of the tee connects to the rest of your vertical chimney stack. The bottom opening of the tee mounts to theBase Wall Supportwhich supports the weight of the chimney stack on the outside of your home.

AllFuel HST 6 inch Insulated Tee with Cap Double Wall

The flat roof flashing provides leak proof penetration of the roof. Our flashings can be used in both vented and fully sealed applications (including sealed chase installations). A Storm Collar, sold separately, is required to seal the flashing.

Allfuelhst Flat Roof Flashing for 8 Chimney Pipe

The 30° Elbow Kit is used to get past rafters or away from an obstruction like plumbing, HVAC, or the roof peak. Up to 2 lengths of chimney pipe (for a maximum run of 72 in. between elbows) can be added between elbows to allow for necessary spacing. An Elbow Strap is included and helps support the weight of the offset from the elbows. If your installation includes two lengths of pipe between the elbows a second Elbow Strap (sold separately) is required. Inner wall 0.019 in.

AllFuel HST 30 Degree Elbow Kit for 6-Inch Inner Diameter Chimney Pipe

ALLFUEL HST AllFuel 6 in. x 6 in. Single Wall Stove Adapter

ComfortBilt Double Wall Stainless Steel Chimney 6-Inch x 36-Inch

Use the Stove Pipe Adapter to connect single wall stove pipe to Class-A double wall insulated chimney. Made of 304 stainless steel and painted black to match your stove pipe. Can be painted any color with high temperature paint. Includes 1 Locking Band also painted black. 0.019 in. thick inner and outer walls (17% thicker than our competition) High density 1.18 in.

AllFuel HST 8 Single to Double Wall Pipe Adapter

AllFuel HST Tee With Clean Out Cap for 8 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

AllFuel HST 8-in W x 10-in L Stainless Steel Stainless Steel Round

The Anchor Plate is used to mount All-Fuel Chimney to a masonry fireplace or directly to an appropriate appliance. Only Compatible with ComfortBilt USA Products UL 103HT certified 304 stainless steel Age.

AllFuel HST Anchor Plate for 8-Inch Inner Diameter Chimney Pipe