White Plastisol Ink Best Cotton & 50/50 White Screen Print Ink – Lawson Screen & Digital Products

MCO-1560 50/50 White is the best plastisol ink for cotton and 50/50 blends. It is ultra-bright white, has excellent opacity and good bleed resistance.
A Bright White Plastisol Ink for Cotton and 50/50 | Great for Underbase and White Printing MCO-1560 50/50 White is a plastisol ink that is more stable, printing easier and smoother due to its unique formulation. Printing this white ink manually will be less tiring. If you use an automatic screen printing machine, you can print this ink with a lower pressure setting to increase screen longevity. For a manual screen printer, any durometer and mesh count works. It’s an ultra-bright white with excellent opacity and good bleed resistance, fast-flashing, semi-thick viscosity. No odor. May be printed on cotton and cotton/polyester blends that are not bad bleeders.MCO-1560 50/50 White ink is a non-phthalate finished ink. It is recommended for cotton and 50/50 blends. While MCO-1560 is a low bleed ink ink, it is not a non-bleed ink. For 50/50 and tri-blend t-shirts that are have bad dye migration (bleeding), Lawson recommends DI-1550 Plus White. How to Use: Recommended for 100% cotton, 50/50 Cotton/Polyester Blends and some polyesters. Can be used right from the container without any modifications but it is recommended to stir prior to printing Print through any mesh count (60 - 230 recommended) with any direct or indirect emulsion of capillary film, using a 60 - 80 durometer sharp edge squeegee. Cure at approximately 325 degrees for 1 minute (dependent on dryer speed, temperature settings and other shop factors). Recommended storage at 65 to 90 degrees F. Avoid storage in direct sunlight and keep container well sealedAlways pretest before use to establish suitability and procedures prior to production.

The Best White Screen Print Plastisol Ink

Screen Printing Equipment & Supplies, DTF and DTG Equipment

Screen Printing Process + Techniques

Dynamic Ready for Use Plastisol Ink

SCREEN PRINT SUPPLY CATALOG 1-800-241 - American Niagara

Cotton White is a white plastisol formulated specifically for high opacity on non-bleed garments. In addition to its excellent opacity, Cotton White

Texsource 19500 Cotton White

Green Dynamic Low Bleed Screen Printing Plastisol Ink

A Roundup of Products Promoted in Las Vegas - Screen Printing Mag

Dynamic Ready for Use Plastisol Ink

Rapid Cure White Screen Printing Ink (Pint - 16oz.) - Plastisol Ink for Screen Printing Fabric - Low Temperature Curing Plastisol by Screen Print Direct - White Plastisol Ink for Silk Screen

BestWhite™, the ultimate white plastisol ink renowned for its superior quality. This high-opacity ink guarantees exceptional coverage with its

Best White Plastisol Ink

30 Screen Printers Name Their Must-Have Tools and Equipment - Screen Printing Mag

Lightning Fast Cure - Cure your prints in just over a minute! With our Rapid Cure Plastisol Inks. Rapid Cure Plastisol Inks cure as low as 270°F

Polyester White (Quart - 32oz.) - Plastisol Ink for Screen Printing Fabric - Low Temperature Curing Plastisol by Screen Print Direct - Fast Cure Ink

Screen Printing Plastisol Ink Tools

Rapid Cure White Screen Printing Ink (Pint - 16oz.) - Plastisol Ink for Screen Printing Fabric - Low Temperature Curing Plastisol by Screen Print Direct - White Plastisol Ink for Silk Screen