This Home Accents item by MYtrappings has 683 favorites from shoppers. Ships from Secaucus, NJ. Listed on Jan 23, 2024
CUSTOM made according to your measurements to fit your fireplace ( up to 40"W x 34"H) for NO additional cost
Please provide accurate measurements
the Width can be up to 40" ( 100 cm ) and the Height can be up to 34" ( 85 cm)
(Please contact, if you need larger size of the cover)
It is designed for all types of the fireplaces and will be made of Felt fabric, which comes in 5 different colors
It can be attached to the metal frame or to the lintel ( a piece of steel that holds up the top row of bricks in the fireplace) by the Magnets or to surface of the fireplace by self-adhesive Hook & Loop VELCRO® brand fasteners/strips.
The cover is easy to remove, when you want to use your fireplace and easy to install, when you want to avoid draft, smell or hide ashes.
The fireplace cover is made of 2 layers of Felt fabric (a non-woven textile well-known for its thermal and acoustic insulation properties) and Super strong flat Magnets, inserted between two layers of felt :
It can be made with
* 4 magnets along the top of the cover ( for a fireplace with the lintel only or "see through" fireplace to cover one side)
* 6 magnets : 4 magnets along the top of the cover and 2 magnets on the sides ( for a fireplace with a metal frame)
* 8 magnets : 4 magnets along the top of the cover and 4 magnets on the sides ( for a fireplace with a metal frame)
* 8 self-Adhesive Hook & Loop VELCRO® brand Fasteners/strips : 4 along the top of the cover and 4 on the sides
Fully reversible (with inserted magnets, of course).
It's Made to Order according to your measurements to fit your fireplace ( up to 40"W x 34"H) for NO additional cost
Just measure the area you plan to cover ( it should be all the way to the floor to avoid draft at the bottom) and
Please provide accurate measurements and double check them before placing your order
Send a photo of your fireplace, if possible.
Please Remember:
*Magnets do not attract all metals. Iron (Fe), Nickel (Ni), Cobalt (Co) and some alloys are the only metals that respond to magnetism. Please check before you order.
*Adhesive VELCRO is recommended for smooth surfaces. Please include a few inches for overlaps for a fireplace cover with VELCRO
* Felt fabric is Flammable material; please do not place it on hot surfaces
Tips:
*You can always insert on your own additional magnets between the layers of felt through the opening located at the bottom of the cover, if needed.
*Make it all the way to the ground to avoid draft at the bottom, If it's possible. Be creative: place decorative pillows, soft toys, logs, or any home-décor items to secure the bottom of the cover
* If you have an Open Fireplace, Magnetic tape strip or Metal Angle bar mounted to the top/sides of the fireplaces will be a great solution to hold Magnetic cover and It should be slightly larger to overlap the fireplace opening for better insulation.
IMPROVED INSULATION: This magnetic fireplace draft cover works to eliminate winter weather drafts, keeping unwanted cold air out of your home to
Neattec Magnetic Fireplace Draft Stopper - Fireplace Cover to Block Cold Air from Vent to Prevent Heat Loss - Magnet Fireplace Screen - Indoor Chimney
Standard Size Masonry Fireplace Doors
CHILL OUT, Fireplace Draft Eliminator - Denmark
Antique Fireplace Fender Cottage Chic Fireplace Bumper Footed 51 Inch Long Fireplace Hearth Guard White Shabby Brass Fireplace Fender
CUSTOM Magnetic Fireplace Draft Stopper for Chimney
Magnetic Fireplace Draft Stopper,Fireplace Cover to Block Cold Air from Vent to Prevent Heat Loss,Magnet Fireplace Screen,Indoor Chimney Draft Blocker
TOHONFOO Fireplace Cover - 45 x 34 in Magnetic
Fireplace Cover
Fireplace Draft Cover CUSTOM MADE your Fireplace Dimensions With