Craft Sha No.22 Olive Green Leathercraft Paint 100ml 3.4oz Water

4.9

(243)

Write Review

$ 1.99

Add to Cart

Qty

In stock

Description

Use this to make your leather a chic olive green. This dye can be applied amongst other colors and liquid latex masking tape to create a camouflage design.
Take a look at this 100ml (3.4 fluid ounce) bottle of water-based leathercraft dye. Use it to make your leather a chic olive green. This aqueous dye can be applied amongst other similar colors and liquid latex masking tape to create a cool camouflage design. This incredible dye can color both the surface and edges of your leather.Simply find a well-ventilated area and clean all dirt or wax from your leatherwork using a mild bleach or oxalic acid (1 teaspoon per pint of water). Then soak a piece of cloth in the dye and rub in a circular motion over your leather, reapplying as much as needed. Other effective dyeing methods include airbrushing or using a standard paint brush. A small sponge or cotton bud saturated in dye is highly recommended for the edge of the leather.Please note that these dyes can only darken your leather further. Application of dyes lighter than your leather will not lighten the colour and may, in fact, darken the colour of your leather.For best results, we recommend a leathercraft lacquer and primer binder in addition to dying. This will help to ensure lacquer adhesion, making sure your dye is properly sealed and your leather is protected for a long time.IMPORTANT NOTE: This dye is specifically for undyed and untreated vegetable tanned leather used in leathercraft. As a result, it may not be suitable for treated leather such as factory produced handbags, table tops, car seats, leather couches, jackets, etc. Many (but not all) of these items have been pre-dyed and treated to resist dyeing and many have a plastic coating that will prevent the absorption of this dye. To test the suitability of this dye on pre-treated leather or chrome tanned leather, thoroughly clean the leather you wish to dye with a suitable cleansing fluid and place a drop of water on the treated area (mild rubbing may be required). If the leather absorbs the water then this dye may be suitable, however, please note that unless your leather is untreated vegetable tanned leather we cannot guarantee the results and recommend you contact the manufacturer of your item for further details. We recommend you always test this dye first on a small patch of leather before committing to an entire project if you are unsure your leather is suitable.