Everest Trade - Block Paving Sealer - High-Performance

Everest Trade high-performance block paving sealer is a solvent-borne, premium polyurethane resin-based sealer and jointing sand stabiliser with exceptional effectiveness. that will provide a heavy duty, long lasting clear seal coating with a wet look finish.
PRODUCT DESCRIPTION Everest Trade high-performance block paving sealer is a solvent-borne, premium polyurethane resin-based sealer and jointing sand stabiliser with exceptional effectiveness. that will provide a heavy-duty, long-lasting clear seal coating with a satin / wet look finish. Its penetration comes about by solvent evaporation, penetrating into the blocks and binding the particles of sand to form an elastomeric joint and protect the paver face from oil and water infiltration. The sealer prevents moss and weed formation when applied correctly, joints should be re-sanded for optimum results. 100% UV light fade resistant, resistant to tyre plucks and resists oil stains and water damage. Suitable for - commercial, public or industrial premises with heavy to extremely heavy traffic, this product is also perfect for use on residential driveways for customers that want an extra hard-wearing product. Maintains the performance life of the pavement. Yields significant whole-life cost savings and reduces interim maintenance.   USES AND SURFACE COMPATIBILITYSuitable for use on concrete block paving, brickwork and concrete. Not suitable for clay pavers.  COMPATIBLE PRODUCTS Driveway Cleaner - Everest Trade Ultimate Driveway Cleaner Oil Stain Remover - Everest Trade Oil Stain Remover Efflorescence Remover - Everest Trade Efflorescence and Salts remover   SPECIAL PROPERTIESIt is easily cleaned and will withstand regular washing. Also resistant to most oils.   SPREADING RATE First coat:                Approximately 4 square meters per litre. Second coat:           Approximately 6 square meters per litre. This is a rough estimate and varies depending on the condition of the driveway and the amount applied with each coat. A third coat can be applied to give a more wet look finish if required.   DRYING TIMEUnder normal conditions, it is touch dry in approximately 3-4 hours. Do not drive on the surface for 24 hours after the last coat.   APPLICATIONBrush, Roller, or Sprayer. Sprayers will provide the best results due to being less chance of interfering with the sanded joints. Rollers and brushes are fine for application, be careful when going over joints for best results. We have compatible application tools on our website. Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.   STORAGE PRECAUTIONSStore away from heat and flames. Secure the lid between uses to prevent sealer hardening. Store away from frost.   THINNERSThinners aren't required with this product, use white spirits or a proprietary brush clear for cleaning.   SURFACE PREPARATIONEnsure all surfaces to be sealed are clean, dry and free from oil and grease and there are a couple of days of good weather so there is no chance of rain during application.

Trail Terms - American Trails

Block Paving Sealer - A Wide Range of Durable Sealers - Premium Paints — Premium Paints Limited

Everest - Roof and Tile Paint & Sealer - High Performance – Premium Paints Limited

Kennel & Cattery Floor Paint - Safe, Tough Dog and Cat Safe Floor Paint — Premium Paints Limited

EVEREST TRADE - ULTIMATE CONCRETE SEALER - SOLVENT FREE - IMPREGNATING FORMULA

Tuinstoelen 8 st met kussens massief teakhout Wood patio chairs, Teak furniture, Wooden garden chairs

15 Litre - Chapin Pro Series Sprayer - With Chemical Resistant FKM

Video Guide 10: Applying a Heavy Duty Block Paving Sealer

SummitSeal - Imprinted Concrete Sealer - SATIN / Wetlook - Highly Dura – Everest Paints