Ideal for fine furniture repair. Can be used to create a "crackling effect" on wood.
Titebond Liquid Hide Glue is the first hide glue to be offered in a liquid, ready-to-use form. It requires no mixing, heating, or stirring. Professional woodworkers use Titebond Liquid Hide for its long assembly time, exceptional strength, and unique crackling effect on wood. Titebond Liquid Hide provides superior creep-resistance, offers excellent sandability, and is unaffected by finishes. Its sensitivity to moisture allows for easy disassembly of parts, a critical benefit in antique restoration or the repair of musical instruments.
Ready-to-use form
Ideal for fine furniture repair
Excellent sandability
Excellent creep-resistance
Can be used to create a "crackling effect" on wood
Slow set allows precise assembly
Physical Properties (Typical)
Type: Natural protein emulsion
State: Liquid
Color: Amber
Dried film: Translucent
Solids: 52%
Viscosity: 4,000 cps
pH: 6.5
Calculated VOC: 0 g/L
Weight/gallon: 9.6 lbs.
Chalk temperature*: N/A
Flash-point: >200°F
Freeze/thaw stability: Stable
Storage life: 12 months in tightly closed containers below 75°F
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Application Guidelines
Application Temperature: Above 50 °F
Open assembly time: 10 minutes (70°F. / 50% RH)
Total assembly time: 20 to 30 minutes (70°F. / 50% RH)
Minimum required spread: 6 mils (typical), or 250 square feet per gallon.
Required clamping pressure: Enough to bring joints tightly together (generally 100-150 psi for softwoods, 125-175 psi for medium woods, and 175-250 psi for hardwoods)
Methods of application: Can be applied by roller or dip spreader, pressurized oil cans, plastic applicators, brush or stick.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Bonding Strength (ASTM D-905 Test with Hard Maple)
Temperature
Strength
Wood Failure
Room Temperature
3,591 psi
72%
150°F. Overnight
3,207 psi
59%
Limitations
Titebond Liquid Hide Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. Keep from freezing. Keep out of reach of children.
Available Sizes
Part #
Size
UPC
Case Qty.
5012
4 Oz. Bottles
037083050127
12
5013
8 Oz. Bottles
037083050134
12
5014
16 Oz. Bottles
037083050141
12
5017
5 Gallon Bucket
037083050172
1
Titebond
Titebond 8 oz. Liquid Hide Glue (12-Pack) 5013 - The Home Depot
FRANKLIN INTERNATIONAL Liquid Hide Wood Glue, 4-oz. 5012
Titebond - Liquid Hide Glue, 16 -oz
Titebond® Liquid Hide Glue - Choose Size
Titebond - Liquid Hide Glue, 16 -oz
Titebond® Liquid Hide Glue - Choose Size
School Glue Liquid, 1 Gal, Dries Clear
Titebond Franklin International 5013 Titebond Liquid Pakistan
Titebond 8 oz. Liquid Hide Glue (12-Pack) 5013 - The Home Depot
Genuine Hide Glue Titebond HIDE
Catinbow T 8000 Mobile Phone Screen Glue Repair Universal Glue
Titebond Liquid Hide Glue
Moderate set time permits unhurried assembly of wood, cloth, glass and other materials. Holds more than 3,500 lbs. per square inch. Allow 24 hours for
Liquid Hide Glue, 16 -oz