High Temp Epoxy Resin in stock
#3000/3120 combine to make our System 3000 High Temp Industrial Epoxy Kit. This kit is engineered to create composite components that will operate in intermediate/high temperature service environments, up to 309°F. It easily wets-out reinforcing fabric for stable fabrications. With the capability to post cure off of the tooling, you can use room temperature tooling for lower fabrication costs. Post-cured, this unfilled, amber epoxy laminating resin offers maximum stability in service applications involving frequent heating and cooling cycles. This epoxy system does not contain methylene dianiline (MDA), or any other potentially harmful aniline derivatives. Cure using a ramp up cure schedule requiring at most 300°F For maximum stability in any application, an oven post-cure is strongly recommended. This epoxy laminating system will gel hard in 24 to 36 hours at 77°F. For applications where continuous service temperature is over 250°F, a post-cure is mandatory. Allow #3000/3120 High Temp Industrial Epoxy to gel at room temperature before initiating an oven post-cure. Mix Ratio (by weight) – 100:18 Pot Life @ 77°F – 90-120 minutes Color – Amber Maximum Service Temperature – 309ºF Post Cure Cycle Ramp up temperature at a rate of no more than 2-5°F per minute. Hold @ 150°F, 250°F, and 300°F for 3 hours each. Ramp down temperature to 100°F at a rate of no more than 2-5°F per minute. Do not shut down the oven and leave to cool.
Fibre Glast is a leading supplier of first quality fiberglass, carbon fiber, kevlar and composite materials. Offering the very best in fiberglass and composite materials for your next areospace, civil engineering, military or motorsports project.
Stone Coat Countertops (2 Gallon) Epoxy Resin Kit for DIY Projects, Kitchens, Bathrooms, Counters, Tables, Wood Slabs, and More! Heat Resistant and Clear Epoxy Resin!
To get the best performance in high temperature service applications, use High Temp Epoxy Surface Coat. Our #1096 High Temp Epoxy Surface Coat is a
High Temp Epoxy Surface Coat
Clear Epoxy Resin with High Gloss Finish for Tabletops - Woodcrafters Kit Woodcrafter Tabletop Epoxy 2 Gallon
EPOXY RESIN 4 HIGH TEMPERATURE FIBERGLASSING & CARBON FIBER PREPREG RESIN 80!
To get the best performance in high temperature service applications, use High Temp Epoxy Surface Coat. Our #1096 High Temp Epoxy Surface Coat is a
High Temp Epoxy Surface Coat
System 4600 High Temp Infusion Epoxy Resin - Fibre Glast
Envirotex Lite Pour on High Gloss Finish 64 Ounce Kit
Let's Resin 60oz Polyurethane Resin, Fast Cured Resin Within 10 Minutes
WiseBond Bar and Table Top epoxy is a super wet gloss epoxy for bars, counter tops, faux marble finishes, and table top flood coating. Zero VOC, low odor, and the perfect viscosity for a 1:1 mix ratio table top epoxy. The 1-gallon kit includes 1/2-gallon of resin and 1/2-gallon of hardener. This wood and concrete top coating epoxy has a 1/8 inch self-leveling high gloss finish epoxy that is UV stable for surface flood coating. This table top epoxy produces a rich super gloss water-like look.
WiseBond - Clear Table Top Epoxy Resin Kit, Crystal Clear Epoxy Resin Kit for Countertops, Bars & Tables, 2 Part Epoxy with 1:1 Ratio Clear Epoxy
Easy Composites Ltd Following The Successful Launch Of Our, 58% OFF
FLAWLESS CRYSTAL CLEAR COATING - Achieve crystal clear, flawlessly transparent epoxy coatings with our ultra high performance 1 gal. resin and
EPOXY Resin Crystal Clear 1 Gallon Kit | 1:1 Resin and Hardener for Super Gloss Coating | for Bars, Outdoor Table Top, Countertop, Art | Safe for Use
High temperature epoxy resin
High temperature epoxy resin
