Features Large torque: 20kg.cm 7.4V large torque Full metal gear: improve servo’s accuracy and extend its service time Aluminum case: it enhances heat dissipation and ensures servo motor work properly High-precision potentiometer: accuracy and linearity have been greatly improved 270°Rotation: Controllable angle range from 0 to 270°, excellent linearity, precise control.
Specification
Specification
Product weight
0.15Ib / 66g
Product size
1.57*0.8*1.59inch / 40*20*40.5mm
Rotation speed
0.20sec/60°(7.4V)
Stall torque
20 kg·cm (277.6 oz·in) @7.4V
Working Voltage
6-8.4V
Stall current
2.4~3A
No-load Current
100mA
Servo Horn
25T
Servo Wire
30cm(11.8inch) in length
Control Method
PWM pulse width control
PWM pulse width range
500~2500us, corresponding to 0~270°
Duty Ratio
0.5ms~2.5ms
Pulse Period
20ms
Wire Layout
red wire: +; black wire: GND; white wire: PWM/signal
Rotation range
0~270°
Servo accuracy
0.3°
20kg Large Torque
This servo boasts an impressive maximum torque of 20KG.CM 7.4V, enhanced by its
accompanying metal servo arm. Delivering robust power, it is housed within an aluminum alloy casing
that facilitates excellent heat dissipation, thereby effectively reducing power consumption.
All Metal Gear
This product showcases exceptional performance, minimal noise output, and the
inclusion of metal gear and dual-ball bearings. By integrating a high-precision potentiometer, its
accuracy and linearity are greatly enhanced leading to an extended service life.
Waterproof Protection
The controllable angle range of the steering gear is 270 degrees, with good
linearity and accurate control. It can be rotated 360 degrees when the power is off.
270°Rotation
The controllable angle range of the steering gear is 270 degrees, with good
linearity and accurate control.
It can be rotated 360 degrees when the power is off.
270°Rotation
The controllable angle range of the steering gear is 270 degrees, with good linearity and accurate control.It can be rotated 360 degrees when the power is off.
Specifications
Item
Specification
Product weight
0.15Ib/ 66g
Product size
1.57*0.8*1.59inch/ 40*20*40.5mm
Rotation speed
0.20sec/ 60°(7.4V)
Stall torque
20 kg·cm (277.6 oz·in) @7.4V
Working Voltage
6-8.4V
Stall current
2.4~3A
No-load Current
100mA
Servo Horn
25T
Servo Wire
30cm(11.8inch) in length
Control Method
PWM pulse width control
PWM pulse width range
500~2500us, corresponding to 0~270°
Duty Ratio
0.5ms~2.5ms
Pulse Period
20ms
Wire Layout
red wire: +; black wire: GND; white wire: PWM/signal
Rotation range
0~270°
Servo accuracy
0.3°
Hiwonder HX-20L 17kg High Torque Serial Bus Servo Full Metal Gear Dual Shaft Bearing Provide Bus servo Communication Protocol for RC Car Robot (240 Degree) : Toys & Games
Hiwonder HPS-2518MG 25KG High Torque Digital Servo Full Metal Gear Sup
Hiwonder HPS-2027MG 20KG High Torque Digital Servo Motor Full Metal Ge
Important: 1. Connect GND is necessary. 2. It's recommended that use lithium polymer battery with high rate discharge(min 5C), please don't use dry battery. 3. Please use a short and thick power cord, don't use Dupont cord 4. Not compatible for redcat thunder drift rc car, not compatible for 1/16 scale car.
20kg Digital Servo Full Metal Gear High Torque, Aluminium Case for Robot DIY (Control Angle 180)
Hiwonder HPS-3527SG 35kg Coreless Digital Servo Metal Gear and Waterpo
Hiwonder LD-27MG Full Metal Gear Digital Servo with 270 Control Angle
Hiwonder HTS-20H Serial Bus High Voltage Servo with 20KG Torque and Da
Feature, 60kg torque digital servo to power your robot, Metal gear for the high accuracy and metal shell for the strong heat dissipation, IP67
Hiwonder LD-60MG Digital Servo/60KG High Torque/RC Car/Single Shaft
Hiwonder 20kg Digital Servo High Torque Servo Full Metal Gear Waterproof for RC LD-27MG
Servo Motor In Robotics Shop Discounts
Hiwonder 20KG High Torque Digital Servo Motor Full Metal Gear, Waterproof Servp for RC Mode DIY,Control Angle 270° : Toys & Games