The ANOVA results showed that thermocycling, distinct light intensity, and different colors of resin materials influenced the microhardness of the composite resins, which was evidenced by the A3 composite resin light-cured with a Valo polywave showing higher hardness values. The purpose of this study was to evaluate the intensity of light-curing units and its relationship with the color stability and microhardness of composite resins with different shades subjected to a thermocycling procedure. Eighty blocks (5.0 × 2.0 mm) of TPH Spectrum composite resin (Dentsply Sirona) were produced and distributed into four groups according to the light-curing units (EC 450, ECEL; Valo, Ultradent) and color of the resin material (A3; C3) (n = 20). Within each group, color stability was measured on half the sample (n = 10) using a UV-2450 visible UV spectrophotometer (Shimadzu), and Knoop hardness was measured on the other half (n = 10) using an HMV 2000 microhardness tester (Shimadzu) before and after thermocycling (12,000 cycles, 5°C and 55°C). Mann-Whitney test was performed on the color stability data; the microhardness data were analyzed using a three-way analysis of variance (ANOVA) and Tukey test (α = .05). The ANOVA results showed that thermocycling, distinct light intensity, and different colors of resin materials influenced the microhardness of the composite resins, which was evidenced by the A3 composite resin light-cured with a Valo polywave showing higher hardness values. There was no statistical difference in the color stability of the A3 composite resin; however, the C3 composite resin light-cured with an EC 450 singlewave light-curing unit showed higher color alteration values. In general, the Valo polywave light-curing unit imparted better mechanical property and color stability to both shades of the composite resins. The different shades of resin material influenced the hardness of the composite resins. Therefore, the light intensity of the light-curing units should be evaluated and monitored, as the amount of light intensity will interfere in the quality and longevity of resin restorations.
Diverse Cell Types, Circuits, and Mechanisms for Color Vision in the Vertebrate Retina
The Psychological Impact of Light & Color
Effect of curing-light attenuation on color stability and physical and chemical properties of resin cements containing different photoinitiators - ScienceDirect
BTS256-UV Spectroradiometer - Irradiance and Dose
Full article: The effect of light curing intensity on bulk-fill composite resins: heat generation and chemomechanical properties
Effect of Light Intensity on the Free-Radical Photopolymerization Kinetics of 2-Hydroxyethyl Methacrylate: Experiments and Simulations
Swan Dental Curing Light, Broad-Spectrum LED Light Cure
Reviewing and understanding the stability mechanism of halide perovskite solar cells - Zhang - 2020 - InfoMat - Wiley Online Library
Illuminating the Resin: What You Need to Know - Oral Health Group
What to Look for in a Dental Curing Light
Effects of UV absorbers and reducing agents on light fastness of cotton fabrics pre-dyed with sodium copper chlorophyllin and gardenia yellow - Zhong Zhao, Mingwen Zhang, Chris Hurren, Liming Zhou, Jihong Wu
Multiwavelength Ortho Curing Light Q8 Pro with Built-in Light Meter - Rundental
Selecting a Dental Light Curing Unit, August 2023
Light curing units
Venus Pearl – Beauty beyond aesthetics.