PTO Link® Compact System - Replacement Locking Pin & Safety Bolt

Product Features: Locking Pin-Compact (replacement) Spring Loaded Stainless Steel For Use with PTO Link® Compact - Tractor (Female) Coupler Dimensions: 2”L x 0.75”W) (3/8” Threads) Weight: Locking Pin-Compact Weight: 2.3 oz NOTE: When replacing, use Loctite® Threadlocker 271 Red (INCLUDED) on housing threads and wrench tight PTO Link® Compact - Safety Bolt The PTO Link® Safety Bolt, also known as the Quick-Release Detent Clevis Pin, is essentially a cotterless Clevis Pin that features a ball detent that depresses and springs up to hold the Clevis Pin into place. This one-piece locking clevis pin is fast and secure. It also acts as an alignment pin for the two mating couplers of the PTO Link® system and further secures the couplers (much like a deadbolt lock) to withstand most high torque scenarios or instances wherein reverse torque on the PTO shaft could be experienced (e.g., while using flex-wing mowers, heavy-duty shredders, tillers, augers, stump grinders, PTO auto-brakes or reverse safety switches, etc.). Since these high torque or reverse torque scenarios on the PTO are often unforeseen, it is therefore required always to install the safety bolt while using the PTO Link® system. The PTO Link® system already comes with a replaceable spring-loaded locking pin (Compact Locking Pin) affixed onto the tractor (female) coupler that engages with the implement (male) coupler for the initial connection. The safety bolt provides the following benefits: Snugly aligns and secures the male and female couplers of the PTO Link® system together to minimize vibration and wear to your driveline; Balances and absorbs excess torque across the entire coupler diameter of the PTO Link® system, providing added strength to your PTO connection during high torque or reverse torque scenarios. Provides enhanced safety, protection, and durability to your PTO Link® system. The Safety Bolt is a Grade 8 bolt featuring a stainless steel, spring-loaded ball detent that functions as an easy insertion and quick-release mechanism. The ball detent retracts when inserted, springs back up when installed through the joined couplers, and locks into place! Installation instructions: Before installing the Safety Bolt, first install the PTO Link® couplers separately on the tractor's PTO (female coupler) and the implement shaft receiver (male coupler). Next, couple the implement and tractor couplers together, aligning the implement coupler's studs into the tractor coupler's openings. Then slightly rotate the implement coupler counter-clockwise (or the tractor coupler clockwise) until the locking pin has locked in place, indicated by an audible "click." Now, note the aligned 1⁄2" opening through both couplers of the fully locked PTO Link® system, positioned across the coupler, opposite the locking pin. To install the safety bolt: Place the chamfered edge of the pin into the 1⁄2" opening on either the tractor or the implement coupler. Push the head of the pin through the aligned 1⁄2" openings on both couplers. The ball detent of the safety bolt will release its internal spring and secure both couplers together. To uninstall the safety bolt: Push the chamfered edge of the safety bolt out. Pull the head of the emerging safety bolt through the couplers, releasing the pin. Once accustomed to the safety bolt, your process to reinstall and uninstall will take only a few seconds. When the PTO Link® system is not in use, affix the safety bolt through the 1⁄2" opening on the tractor coupler for convenient storage. Dimensions: (1.225" L x 0.630" W) Weight: 1.5 oz
Product Features: Locking Pin-Compact (replacement) Spring Loaded Stainless Steel For Use with PTO Link® Compact - Tractor (Female) Coupler Dimensions: 2”L x 0.75”W) (3/8” Threads) Weight: Locking Pin-Compact Weight: 2.3 oz NOTE: When replacing, use Loctite® Threadlocker 271 Red (INCLUDED) on housing threads and wrench tight PTO Link® Compact - Safety Bolt The PTO Link® Safety Bolt, also known as the Quick-Release Detent Clevis Pin, is essentially a cotterless Clevis Pin that features a ball detent that depresses and springs up to hold the Clevis Pin into place. This one-piece locking clevis pin is fast and secure. It also acts as an alignment pin for the two mating couplers of the PTO Link® system and further secures the couplers (much like a deadbolt lock) to withstand most high torque scenarios or instances wherein reverse torque on the PTO shaft could be experienced (e.g., while using flex-wing mowers, heavy-duty shredders, tillers, augers, stump grinders, PTO auto-brakes or reverse safety switches, etc.). Since these high torque or reverse torque scenarios on the PTO are often unforeseen, it is therefore required always to install the safety bolt while using the PTO Link® system. The PTO Link® system already comes with a replaceable spring-loaded locking pin (Compact Locking Pin) affixed onto the tractor (female) coupler that engages with the implement (male) coupler for the initial connection. The safety bolt provides the following benefits: Snugly aligns and secures the male and female couplers of the PTO Link® system together to minimize vibration and wear to your driveline; Balances and absorbs excess torque across the entire coupler diameter of the PTO Link® system, providing added strength to your PTO connection during high torque or reverse torque scenarios. Provides enhanced safety, protection, and durability to your PTO Link® system. The Safety Bolt is a Grade 8 bolt featuring a stainless steel, spring-loaded ball detent that functions as an easy insertion and quick-release mechanism. The ball detent retracts when inserted, springs back up when installed through the joined couplers, and locks into place! Installation instructions: Before installing the Safety Bolt, first install the PTO Link® couplers separately on the tractor's PTO (female coupler) and the implement shaft receiver (male coupler). Next, couple the implement and tractor couplers together, aligning the implement coupler's studs into the tractor coupler's openings. Then slightly rotate the implement coupler counter-clockwise (or the tractor coupler clockwise) until the locking pin has locked in place, indicated by an audible click. Now, note the aligned 1⁄2 opening through both couplers of the fully locked PTO Link® system, positioned across the coupler, opposite the locking pin. To install the safety bolt: Place the chamfered edge of the pin into the 1⁄2 opening on either the tractor or the implement coupler. Push the head of the pin through the aligned 1⁄2 openings on both couplers. The ball detent of the safety bolt will release its internal spring and secure both couplers together. To uninstall the safety bolt: Push the chamfered edge of the safety bolt out. Pull the head of the emerging safety bolt through the couplers, releasing the pin. Once accustomed to the safety bolt, your process to reinstall and uninstall will take only a few seconds. When the PTO Link® system is not in use, affix the safety bolt through the 1⁄2 opening on the tractor coupler for convenient storage. Dimensions: (1.225 L x 0.630 W) Weight: 1.5 oz

Round spring clasp locks securely over end of pin, to keep pin in place and easily pulls off for quick release. Yellow Zinc Dichromate plating is corrosion resistant, preventing rust for longer pin life. Great for lawn, gardening, DIY, farming, truck, towing, and industrial applications! Convenient and Easy-to-use to secure your equipment, gear, or trailer. Usable length is the area from under the head to the clasp when locked.

PTO Shaft Locking Pin 7/16 x 3-1/2 ( Pack of 3)

The Best Door Lock Reviews by Wirecutter

PTO Accessories - Earth Tools

Hillman 6-mm x 45-1/2-mm Silver Zinc-Plated Binder Interior Binding Post Screws | 884303

PTO Accessories - Earth Tools

The Heininger Advantage SportsRack X-Large 2.5 in. Trailer Hitch Lock is great for securing your bike rack or trailer to the hitch with a longer pin to fit the Class 5 hitch on the new Chevy/GMC HD truck line, or any hitch requiring a 3-5/8 in. span. New X-Large 2.5 in. hitch lock uses a higher strength steel to handle the load ratings associated with Class 5 hitches. Locks pin diameter is 5/8 in. and inside width is 3-5/8 in. and has an overall length of 6-7/8 in.

Hitchmate 6013-Receiver Hitch Lock- 2-1/2-Inch Receiver

Link - Dual Band WiFi Router – Teradek

Wire lock pins are a clevis pin with an attached wire loop that is pulled over the end of the pin. The loop at the end of the bent wire slides over the post for simple securing and removal. Pins are round in shape. Parts are similar to a clevis pin but with a wire loop attached to the end.

Hillman 2-in Round Wire Lock Pin 882693

Pin Pad