ESSMO™ Neon Light Blue Glitter Sparkle Heat Transfer Vinyl HTV

Material Specification: PU Composition Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure sensitive backing Glitter Finish Application Instruction (Home Iron) Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cover sheet Place o

Material Specification:

• PU Composition
• Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness)
• Heat pressure sensitive backing
• Glitter Finish

Application Instruction (Home Iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

• Cut in reverse
• Weed excess material
• Preheat all fabric prior to pressing for best results
• Apply design at 305°F/150°C-160°C for 12-15 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

• 100% Cotton
• Poly / Cotton Blends
• 100% Polyester
• Leather

Laundering:

• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent (Max 60°C)
• Dry on normal dryer setting
• Do not bleach or dry clean

Note: Material will be rolled for shipment. Due to the nature of the material, wrinkles might appear after unroll. In this case, peel off the transfer tape (clear film) and re-apply transfer tape onto the film with heavy flat item on top such as yellow page for 15 minutes, the film will be back to the flat shape.

Heat Transfer Vinyl – Essmovinyl

HTVRONT 10 x 5FT Glitter Green Vinyl Iron on for Cricut & All Cutter Machine - Easy Weed for Craft Heat Vinyl Design

Create Custom Designs that Glow in the Dark!, Glow In The Dark is a polyurethane heat transfer vinyl that looks great in the daylight and glows in the

Neon Blue Glow In The Dark Heat Transfer Vinyl (HTV)

Glitter Heat Transfer Vinyl, Attractive Designs with Eye Catching Sparkle!, Bling out plain designs for maximum appeal with the best Glitter HTV on

12 Neon Blue Siser Glitter Heat Transfer Vinyl (HTV)

Siser Glitter Heat Transfer Vinyl (HTV) - Mermaid Blue

ESSMO™ Neon Purple Glitter Sparkle Heat Transfer Vinyl HTV DG31

Essmo™ Glow in the Dark Neon Yellow Heat Transfer Vinyl HTV GD02 – Essmovinyl

You can cut and weed easily through the designs just right. The glitter hTV vinyl is sensitive to temperature and pressure, which can be heat

Glitter Heat Transfer Vinyl HTV Vinyl Iron On Heat Press T-shirt for Cricut

Siser Holographic HTV Heat Transfer Warehouse

ESSMO™ Orange Glow in the Dark Heat Transfer Vinyl HTV T-shirt 20 Roll Iron Heat Press

Neon Blue Glow In The Dark Heat Transfer Vinyl (HTV)