This backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash. It has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. This is CPSIA Certified Recomended Cut Settings *Suggestion only, used for a starting point. Yo
This backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash. It has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics.
This is CPSIA Certified
Recomended Cut Settings
*Suggestion only, used for a starting point. Your settings may need to be adjusted from here. We always suggest test cutting to find the best settings for your individual machine*
Cricut®:
Blade: Standard
Setting: Iron-on
Silhouette Cameo:
Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Speed: 8
Thickness: 6
Brother:
Blade: 2
Cut Speed: 1
Cut Pressure: 1
Application Instructions (heat press)
• Cut in reverse• Weed excess material
• Preheat garment for 2-3 seconds
• Cover design with Teflon cover sheet
• Apply design at 305°
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Teflon cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or cold
Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Size is +/- .5 inch on width, +/- 3% on length
Colors of products may be different than what the screen on your device shows.
TIP: Always perform a test cut prior to cutting a whole design.
DIY APPAREL - Personalize t-shirts, hoodies, pants, hats, bags, and so much more! EasyWeed allows you to customize a wide variety of fabrics including
Siser EasyWeed HTV 11.8 x 3ft Roll (Pale Blue) - Iron On Heat Transfer Vinyl - Compatible with Siser, Cricut and Silhouette Cutters - Layerable
Siser EasyWeed EcoStretch 12 Heat Transfer Vinyl
Siser EasyWeed FLUORESCENT (HTV) Heat Transfer Vinyl 12 Width Sold By – Dee Vinyl
Siser EasyWeed Navy Blue HTV Choose Your Length –
rolls Archives - Page 2 of 2 - craftcuttersupply
EasyWeed is designed to be well easy! Compatible with virtually all craft cutters on the market, your designs- big and small- can be cut out of
Siser EasyWeed Heat Transfer Vinyl 15 x 12 Sheet (Pale Blue)
Siser%20Easyweed%20Pale%20Blue%2012%26rdquo%3B%20x%2015%26rdquo%3B%20Sheets%20Siser%20Easyweed%20Pale%20Blue%2012%26rdquo%3B%20x%2015%26rdquo%3B%20she
Siser Easyweed - Pale Blue - 12 x 15
Siser EasyWeed - Sky Blue – Emerald Vinyl
Siser EasyWeed 15 Roll (Sky Blue, 3ft) : Arts, Crafts & Sewing
Siser Easyweed HTV –