Partall Hi-Temp Wax is a premium multi-release mold release agent formulated from a blend of hydrocarbon and microcrystalline waxes fortified with PTFE polymer. It is particularly recommended for use with epoxies or phenolics as a part of molding processes that cure and/or catalyze at higher temperatures (150-300 degrees F).
Partall Paste Wax #2 in stock. Excellent mold release - Fibre Glast
Mold Releases, REXCO, Partall, PVA, Stoner
Rexco – Partall Paste #2 wax - Composite Envisions
Parting wax is a non-silicone green wax specially formulated to produce a tough, durable, high-gloss surface. When used with #13 PVA, Partall parting wax delivers excellent release characteristics. Special preparation is required when using on a new mold:Use a clean dry cloth or applicator pad to apply a thin even coat of Parting Wax to mold surface. If buffing by hand, apply to small section and begin buffing within one minute of application.
Fibre Glast Parting Wax - 7 lb. Tin
Partall Mold Release Hi-Temp Paste Wax 12 oz. Can
Rexco Formula Five Mold Release Wax 12 oz. – epoxy world
One Quart Bottle, Partall # 10 PVA - Fiberglass Supply
Release Agents - Wax - PVA - Semi-permanent
Rexco Partall Paste #2 Mold Release Wax -12 oz can
Rexco
Mold Releases, REXCO, Partall, PVA, Stoner
PARTALL® PASTE #2 - REXCO-USA
Partall® Hi-Temp Wax 340g
Release Agents - Wax - PVA - Semi-permanent
Partall Hi-Temp Mold Release Wax -12oz Can – Fiberglass Source