Oversized Handcuff Key, Ring Style A high quality extra large key designed to make double locking and unlocking restraints faster and easier. The extra long aluminum barrel is oversized and knurled for lighter weight and easy handling. The flag tip and double lock pin are made from heat treated alloy steel for high str
A high quality extra large key designed to make double locking and unlocking restraints faster and easier. The extra long aluminum barrel is oversized and knurled for lighter weight and easy handling. The flag tip and double lock pin are made from heat treated alloy steel for high strength and durability. The key ring is on a swivel for easy turning. Compatible with all standard type handcuff locking mechanism. Available in silver or black finish.
This key is very similar to the Zak Tool #10 Round Swivel Key, only larger.
4 3/8 long. Made in USA. Available in nickel or black.
Peerless Handcuff Company was established in 1914 in Springfield, Massachusetts. Over ninety years later, the classic swing through design of the original Peerless handcuff, continues to be the industry standard. Peerless offers a full line of restraints including chain link handcuffs, hinged handcuffs, oversize handcuffs, leg irons, waist chains and color plated restraints. All of our products are designed to meet and exceed the tough U.S. National Institute of Justice standards for strength and quality. All Peerless products are backed by a lifetime warranty for manufacture defects.
Use only approved restraining procedures such as the guidelines in our handcuff manual. Frequent review and practice of proper procedures will increase your safety and efficiency. Approved procedures will also help to ensure your restraints continue to function properly. While Peerlesså¨ restraints are designed and manufactured to take abuse, avoid dropping onto or banging against hard surfaces. Restraints should receive regular care and maintenance. Inspect them frequently. Keep the ratchet and key hole free of dirt, lint or other foreign substances which may hinder proper functioning. When unlocking your restraint be careful not to torque the key guide post; this will loosen the post causing it to fall out. Also, be careful not to over rotate the key causing the key flag to break off or become stuck in the locking mechanism. Use extra caution when using oversize keys. When possible carry your restraints in a protective case to reduce exposure to outside elements. If exposed to moisture dry thoroughly. Most importantly, dry the inside locking mechanisms.
Peerless Handcuff Company hereby warrants that any restraints manufactured after January 1, 1996 is free of manufacture defects.
In case of manufacture defect, Peerless Handcuff Company agrees to repair or replace a defective restraint when it is returned to our Springfield, Massachusetts, U.S.A. address. This warranty does not cover damage caused by abuse or ordinary wear and tear of the handcuff, nor any damages whatsoever which may be incurred by reason of any failure to carefully comply with directions as outlined in the manufacturer's instructions.
Stamping or etching of identification markings on any part of the restraint after they have left the factory is not recommended and may cause malfunction of product and void warranty.
Please note: unless in stock, there is currently a roughly 6 week lead time on these products.
Note: the price above is for one (1) plate only.
The BAO Tactical standalone 6x6 and 6x8 single curve full cut model# BAO 4100 hard armor plates are certified to exceed the NIJ .06 Standard Level IV specifications. They are also amazingly light, weighing only 2.3 lbs. and 3.2 lbs. with a thinness of only .93. Made with a single curve, they make a perfect side plate to be inserted into your carrier cummerbund or side plate pouches, contouring to your body.
Weapon Type |
Ammunition | Striking Velocity Ft/s ± 30 |
Striking Velocity M/s ± 9 |
Rifle AK-47 | 7.62 x 39mm - M43/API |
2390 | 728 |
Rifle FN FAL | 7.62 x 51mm - M80 Ball |
2800 | 853 |
Rifle M-14 | 7.62 x 51mm - M61 |
2830 | 863 |
Rifle AK-47, M, SKS |
7.62 x 39mm - M67 |
2390 | 728 |
Rifle M-16 /AR-15 |
5.56 x 45mm - M193/M855/SS109 |
3150 | 960 |
Rifle .30-06 Springfield |
7.62 x 63 mm - JSP |
2780 | 847 |
Rifle Mosin–Nagant |
7.62 x 54R - LPS/B-32 API |
2850 | 869 |
Rifle .30-06 |
7.62 x 63 mm - AP M2 |
2900 | 884 |
Certified NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.
The BAO Tactical V3 ballistic panel is thinner and lighter than the original BAO V2 plate backer, but with the same NIJ IIIA stopping power. This item can be used by itself as level IIIA protection or used as a hard armor plate backer. Some have even put the ballistic panels in front of steel level lll plates to help with spalling and ricochet.
Many others are selling similar panels for more money and have not had them tested by a NIJ certified lab so be careful who you buy from. These are a reputable brand, having undergone legitimate testing, and are a superb product all around.
Note: unless in stock, there is currently a 16-week lead time on these products.
The BAO Tactical L110 comes in multiple sizes, depending on your specific needs and is a perfect add-on to any vest for additional protection. Advanced UHMWPE design. Buoyant. Water repellent polyurethane coated 500 Denier CORDURA fabric finish. Made in the U.S.A. Special threat testing conducted in accordance with NIJ Standard 0101.06 (modified).
NIJ Standard 0108.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0108.01.
Made in the USA by Hesco.
BAO's steel plate measures approximately .25” thick (with base coat) with a weight of 7.875 lbs in a 10×12 shooter's cut configuration. These plates address law enforcement departments looking for an ASK (Active Shooter Kit) option and Fire/EMS departments looking for an affordable yet durable Level III compliant plate option, addressing threats as high as 7.62x51/.308 @ 2780 ft/s @ 15 meters. These plates offer a 20-year warranty.
Fits into the rifle plate pocket of your plate carrier, tactical entry vest, or compatible overt body armor carrier.
Rifle | Ammunition | Max Ft/s | Max m/s | Test Rounds |
LEAD CORE | ||||
Rifle AK-47, M, SKS |
7.62 x 39mm M67 |
2780 | 847 |
6 |
bao tactical steel plate_sp_4436047528002
Peerless Model 702C-6X Oversized Nickel Finish Handcuffs with 6 Chain
High Security Peerless Restraints - BOA Handcuff Company
PEERLESS HANDCUFF CO. No. 254223 HANDCUFFS & KEY VINTAGE PATENT USA $74.00 - PicClick
PEERLESS HANDCUFF KEYS
PEERLESS OVERSIZED HANDCUFF Key, Clip Style $14.94 - PicClick
Peerless Hinged Handcuffs Style 801C – Guardian Supply
The Model 705 is made to the same standards as other Peerless products. It features all steel construction, spun rivets and a rust resistant nickel
Peerless Model 705C-BLACK Oversized Leg Irons, Black
Handcuff Keys, Lot of 4, Peerless Handcuff Key, Smith Wesson Handcuff Key
Chain Link Handcuffs - Peerless Handcuff Company
PEERLESS HANDCUFF CO. No. 254223 HANDCUFFS & KEY VINTAGE PATENT USA $74.00 - PicClick
Peerless Handcuff Company Oversize Handcuff Key Black
HWC UNIVERSAL SLOTTED Stainless Steel Handcuff Key, 2-7/8 Long (Fits Smith&Wesson,Peerless,Hiatts/Hiatt-Thompson, ASP, & MOST other Models !) : Sports & Outdoors
Peerless 702C Chain Link Handcuff, Nickle Finish, Oversize - 1 Each The Peerless Model 702C is designed specifically for larger individuals or special
Peerless 702C Chain Link Handcuff, Nickle, Oversize, 1 Each