STRONN Polyurethane Heat Activated Adhesive Glue Automotive

STRONN Polyurethane Heat Activated Adhesive Glue Automotive

4.8
(739)
Write Review
More
$ 13.99
Add to Cart
In stock
Description

8OZ  STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue  FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures

8OZ  STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue 


FOR INDUSTRIAL OR PROFESSIONAL USE ONLY.


One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures.

And for automotive upholstery

Made in USA


How to use: It is used at a temperature not lower than 18°C. Clean both surfaces and apply on each 1-2 layers of glue and allow to dry for 15-20 minutes. Then the surfaces are heated with a dryer at a temperature of 130F and immediately very tightly press for 3-5 seconds. Final adhesion is achieved after 24 hours.

Add 3-5% of hardener improves the adhesion of all and especially difficult to adhere materials (SBR rubber, TEP, PU, PVC, ABS, greased leathers).



DANGER! HIGHLY FLAMMABLE LIQUID AND VAPOR, CAUSES SERIOUS EYE IRRITATION, CAUSES SKIN IRRITATION, MAY

CAUSE AN ALLERGIC SKIN REACTION, MAY CAUSE DROWSINESS OR DIZZINESS. MAY DAMAGE FERTILITY OR THE UNBORN CHILD, CAUSES DAMAGE TO NERVOUS SYSTEM AND SENSORY ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.


8OZ  STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue  FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures. And for automotive upholstery Made in USA How to use: It is used at a temperature not lower than 18°C. Clean both surfaces and apply on each 1-2 layers of glue and allow to dry for 15-20 minutes. Then the surfaces are heated with a dryer at a temperature of 130F and immediately very tightly press for 3-5 seconds. Final adhesion is achieved after 24 hours. Add 3-5% of hardener improves the adhesion of all and especially difficult to adhere materials (SBR rubber, TEP, PU, PVC, ABS, greased leathers). DANGER! HIGHLY FLAMMABLE LIQUID AND VAPOR, CAUSES SERIOUS EYE IRRITATION, CAUSES SKIN IRRITATION, MAY CAUSE AN ALLERGIC SKIN REACTION, MAY CAUSE DROWSINESS OR DIZZINESS. MAY DAMAGE FERTILITY OR THE UNBORN CHILD, CAUSES DAMAGE TO NERVOUS SYSTEM AND SENSORY ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

LOCTITE PL Premium 3x 12-Pack Brown Polyurethane Interior/Exterior Construction Adhesive (10-fl oz) in the Construction Adhesive department at

Lord 7100B Urethane Adhesive 5 Gallon - Chemical Concepts

STRONN Polyurethane Heat Activated Adhesive Glue Automotive

Tensor P307 Low-Odor California Compliant Spray Adhesive - Chemical Concepts

Weld-On #58 (formerly SciGrip #58) Clear Urethane Adhesive – 50 ml Cartridge - Chemical Concepts

Alcantara Hat

Kenda Farben Heat activated Polyurethane contact adhesive SAR 306 for autos etc.

Complete Guide to Metal Adhesive

Polyurethane Soles

Hot Melt vs. Heat Activated Adhesive