Novus Plastic 3 Heavy Scratch Remover. 2 Ounce Squeeze Bottle

(289)

Write Review

$ 5.00

Add to Cart

Qty

In stock

Description

This Kits item by thePaperFramer has 3 favorites from shoppers. Ships from Wilkes Barre, PA. Listed on Oct 5, 2023
Novus Plastic #3 Heavy Scratch Remover. 2 Ounce Squeeze Bottle Removes heavy scratches and abrasions from most acrylic surfaces. Use when damage is too severe to be restored with NOVUS No. 2 polish. Requires use of NOVUS No. 2 for final finishing Not recommended for use on coated plastics Instructions for use. Shake well. Test in an inconspicuous area . Apply NOVUS No. 3 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times. Continue polishing until only fine scratches remain. Using cloth, remove all remaining polish, this is very important! Using a clean cloth, apply NOVUS No. 2 in a circular motion uniformly to entire surface. Polish using light pressure until NOVUS No. 2 dries to a light haze. Using a clean portion of the cloth, buff the surface clean. Follow with NOVUS No. 1 for best results. ----------------------------------------------------------- Cleaning/Polishing Tips Before attempting to clean or remove scratches, always make sure the plastic is cool to the touch. Use a liberal amount plastic cleaner to safely remove surface dust and dirt. In addition test scratch removers in a small, inconspicuous area for compatibility. Some plastics (not mine) are coated with a thin film which may be damaged by the abrasives in the polish. Novus No. 2 and No. 3 are not recommended for use on eyeglass lenses. For best results, use Novus Polish Mates or a clean Microfiber cloth. The ideal cloth is nonabrasive, absorbent, lint free and disposable. (Reusable cloths can retain abrasive particles and cause damage.) Avoid using polyester or rayon wipes. If Novus Polish Mates are not available, use a soft cloth, such as a cloth diaper or a clean Microfiber Cloth. If the damage is fairly large or badly damaged, a power buffer may be used with Novus No. 2 and No. 3. Use a clean wool or cotton bonnet and operate the buffer at low speed, approximately 1000 ROM, to avoid overheating the plastic. Each polish should be applied with a separated, clean bonnet. Return Policy. Items being returned must be in new, resalable condition. If your item includes acrylic, it must be new and have the plastic mask still intact. If the return is due to some fault of mine, I will pay the return shipping. If the return is reasons other than the seller’s fault, the buyer is responsible for return shipping. Additionally, the seller will deduct the original shipping from the refund.