System Three SculpWood Paste Epoxy Wood Filler, 0.5 Gallon Kit

Premium Epoxy: SculpWood Paste is a smooth, creamy 2-part epoxy finishing paste compound that's compatible with most water/solvent-based primers and

System Three SculpWood Paste Epoxy Wood Filler, 0.5 Gallon Kit

QuikFair is a lightweight - microballoon-filled - fast-curing two-part epoxy fairing putty with excellent moisture resistance.

System Three 1400K42 Silvertip QuikFair Kit, 1.5 Quarts, Tan

Black Epoxy Pigment Concentrate - 2 Oz Bottle UK

System Three Sculpwood Putty – Woodworker Network

System Three silica thickener is an extremely fine powder used to create a very smooth, non-sagging, high strength mixture. This material is also referred to as colloidal or fumed silica, and is an excellent thixotropic agent which is used to control the viscosity of mixed epoxy systems. Silica can be used alone for a very smooth, non-sagging, high strength mixture or combined with fillers or fibers to make them non-sagging.

System Three 3105S47 White Silica Thickener, 5 Quart Tub

System Three 1 Quart SculpWood Paste Kit

QuikFair is a lightweight - microballoon-filled - fast-curing two-part epoxy fairing putty with excellent moisture resistance.

System Three 1400K44 Silvertip QuikFair Kit, 3 Quart, Tan

For over 35 years, G-2 has been an excellent epoxy adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine yacht joinery. Use G-2 for both interior and exterior applications as well as below the waterline. G-2 can be mixed in small or large batches, has a long pot life and cures overnight.

System Three G-2 Epoxy Adhesive, 1.5 Pint Kit

System Three RotFix Penetrating Epoxy Sealer, 1.5 Greece

System Three 1 Quart SculpWood Paste Kit

System Three 1 Quart SculpWood Paste Kit

Expoxy putty. SculWood Series. Moldable waterproof putty that kneads like clay and cures to a permanent wood-like state. For interior and exterior use. Use to replace rotted or chipped away wood cracks and other cosmetic defects in window and door sills frames railings and furniture. Will not shrink or become brittle after curing. 1 to 1 mixing ratio. Resin and hardener easily mixed by hand. Once cured it can be sanded carved or machined and will hold fasteners nails and screws.

SculpWood 1600K16 Moldable Epoxy Putty1 Quart

SculpWood Paste is a spreadable, permanent, 100% waterproof paste for filling smaller cracks and surface defects in rot-damaged wood and other porous materials. It spreads easily, and won't sag, drag or pull. Can be used indoors and out, and is ideal for repairing window sills, porch railings and moldings with weather and rot damage. The paste is an excellent companion for Sculpwood Putty (#43812, sold separately), which is used to fill and rebuild larger voids.

System Three 1610K05 4 oz SculpWood Paste Kit 2-Count