2000 Series Dual Mode Servo (25-3, Speed) - goBILDA
Meet the Dual Mode ‘SPEED’ Servo. This servo is essentially the original 2000-0025-0002 ‘TORQUE’ Servo, but with a lower ratio to achieve a quicker transit speed! Over 2x faster than its counterpart, this servo saves valuable time where it counts!Just like the 25-2, this servo boasts two different modes which allow it to fill a variety of roles on your robot or project. In the default mode, the servo is able to rotate 300 degrees while having positioning feedback. In this mode, the PWM signal will determine the position of the servo. Using the 3102 Series Dual Mode Servo Programmer (1-1) the servo can be toggled into continuous rotation mode. In this mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.
2000 Series Dual Mode Servo (25-3, Speed) - goBILDA
2000 Series 5-Turn, Dual Mode Servo (25-3, Speed) - goBILDA
Meet the Dual Mode 5-Turn ‘SPEED’ Servo. Like the other 2000 Series goBILDA® servos, the 2000-0025-0503 boasts two different modes:, Default Mode,
2000 Series 5-Turn, Dual Mode Servo (25-3, Speed)
2000 Series Dual Mode Servo (25-1) - goBILDA
Meet the Dual Mode 5-Turn ‘SPEED’ Servo. Like the other 2000 Series goBILDA® servos, the 2000-0025-0503 boasts two different modes:, Default Mode,
2000 Series 5-Turn, Dual Mode Servo (25-3, Speed)
2000 Series Dual Mode Servo (25-1) - goBILDA
2000 Series 5-Turn, Dual Mode Servo (25-2, Torque) - ServoCity
2000 Series Dual Mode Servo (25-3, Speed) - goBILDA
Servos
2000 Series Dual Mode Servo (25-2, Torque) - goBILDA
