3-Piece Fly Cutter Set (3/4 inch, 1-1/8 inch, 1-3/8 inch)

Fly cutters are used in a milling machine to cut a large flat surface on a piece of stock. Includes 3 black oxide steel holders: 3/4 inch, 1-1/8 inches and 1-3/8 inches in diameter, 3 ready-to-sharpen tool blanks, and wood storage rack. 1/2 inch shanks.

Tool Body Dia: 1-1/2, 2, 2-1/2 ; Shank Size: 3/4'' ; Tool Bit Size: 5/16 Hardened steel ;Machines up to a 6 wide surface with a standard tool bit ;

3 PC Fly Cutter Set 3/4'' Shank Metal for Bridgeport Milling Hardened Cutting

Steelex M1096 Fly Cutter Set with Tool Bits - Screwdriver Bit Sets

Descriptions: 1. Fit for abrasives cutting wheel with 3/8-inch arbor hole 2. Including one disk holder, one pin wrench and one open ended wrench. 4. Professional fittings drill angle grinder. The drill can meet the electric drill grinding, tiles cutting, wood and metal polishing. (Need to self-purchase grinding plate). 5. Notice: Pay attention to tighten the plate to prevent cutting piece flying out. Do not stand beside.

16mm 5/8 Drill Angle Grinder Mandrel Adapter Disc Holder 2 Wrench Set 3 in 1

45529 Carbide Tipped Spoilboard Surfacing, Rabbeting, Flycutter, Slab Leveler, Surface Planer & Flattening 1-1/4 Dia x 9/16 x 1/2 Inch Shank Router Bit

3-Piece Fly Cutter Set (3/4 Inch, 1-1/8 Inch, 1-3/8 Inch Dia

REMS 113340 - RAS Cu 3-35 Tube Cutter (1/8-1-3/8) (REGULAR PRICE $70.80) - REMS Tools USA (Teal Corporation)

Two methods for oversized flying geese including cutting charts - The Crafty Quilter

1/2 D x 2 H x 1/2 Shank Rockler Piloted Flush Trim Bit

**此商品由 Assort Machine 工具銷售，其他未經授權銷售的賣家 表直徑 80 毫米 (3) 表已分級360度。 無夾盤的垂直位置中心高度：2-5/8 (約66毫米) 直徑80毫米的旋轉臺可以水平和垂直安裝。 蠕蟲：齒輪比為 1：36，這意味着 1 把手旋轉將桌子轉至 10 度 隨附

3 英吋/80 mm 旋轉桌 & 65 公釐 3 爪 自居中 Chuck+ 鋼背板 + 3x M6 T-螺母螺栓 - 金屬加工，工程索引銑削套組

Brand

Micro-Mark 3-piece Fly Cutter Set (3/4 Inch, 1-1/8 Inch, 1-3/8