FullPartsAndTools Locking Silent Hitch Pin ~ fullpartsandtools

Problems with your hitch? Does it rattle or move? Secure it with our Locking Silent Hitch Pin! No more distracting rattle & motion in the hitch and absorbs shock loads. Has a heavy-duty lock with a nylon jacket and rubber dust cover for easy grip and corrosion protection from exterior and interior.
Secures and Stops The Annoying Rattling! Easy to install and gets rid of the rattle! Great design and the locking mechanism works great! Highly recommend getting this for your hitch! - Ross B.  Why Buy Our Locking Silent Hitch Pin? ✅DURABLE: Has a 5/8 inch anti-rattle pin that fits 2.5 inch hitch receivers with up to Class IV tow ratings (12,000 lbs max). Heavy-duty lock with a nylon jacket and rubber dust cover for easy grip and corrosion protection from exterior and interior.   ✅EASY TO USE: With 90-degree press-on lock swivels for convenience and no fumble access in tight hitch spaces. The lock snaps 100% securely onto the pin without a key.   ✅SILENT TOWING: No more distracting rattle & motion in the hitch and it absorbs shock loads. Metal sleeve equalizes 5/8 inch shoulder across both pin holes for increased strength. 📋Frequently Asked Questions: Q: What kind of hitch extension will this work with? A: This is designed for hitches that have an inside diameter of 2 inches and a wide outer collar (often called 2.5 inches or a 3 inches hitch). Q: What is the width of the threaded square that fits inside the hitch?  A: The square block on the Locking Silent Hitch Pin is 1 1/2 inches x 1 3/8 inches x 3/4 inches. Q: How to install? A:  Step 1: Insert the Spring Nut into the hitch accessory shank tube. Align the Spring Nut’s coil with the hitch receiver pinhole. STEP 2: With the Spring Nut compressed within the accessory shank, slide the shank into the vehicle’s hitch receiver and align the hitch pinholes. STEP 3: Insert the Silent Hitch Pin with the Split Washer and Flat Washer into the hitch pin hole and thread the pin through the threaded block side of the Spring Nut. Slide the sleeve over the end of the pin and into the receiver pinhole. Using a 7/8” wrench, fully tighten the Pin so it is snug and tight; secure with Clip

* ✔ Designed to Fit 1-1/4 receivers. * ✔ 1/2 diameter pin with 2 useable length. * ✔ 100% Made of Stainless Steel, will never rust or corrode.

LFPartS 100% Stainless Steel Trailer Hitch Pin Anti-Rattle No Wobble Bolt Keeper Grip Clip Kit 3 inches, (75mm) (Will Fit 1 1/4 Receivers)

The BulletProof Stainless Steel Locking Pin is possibly the best solution for locking nearly any hitch to your vehicle receiver and for locking your dual ball to your hitch. This locking pin is rated to the max capacity of the hitch 14,000 - 36,000 Pound and offers peace of mind when leaving your vehicle unattended. The pin has a thick, lockable barrel that will prevent theft as well as provide a solid hold on your hitch.

Bulletproof Hitches Locking Pin - BPLP

FullPartsAndTools Locking Silent Hitch Pin ~ fullpartsandtools

Sunnyway 10 Pcs Trailer Coupler Pin 1/4 inch Diameter 4inch Long, Heavy-Duty PTO Shaft Locking Pin Set,Trailer Hitch Locking Pin, Lawn Mower Hitch Pin Quick

Products – fullpartsandtools

Let's Go Aero (SHP2040-XL) Keyless Press-on Locking

FullPartsAndTools Locking Silent Hitch Pin ~ fullpartsandtools

(10 Pieces) Heavy Duty Safety Coupler Pin,Round Wire

Silent Hitch Pin: 5/8 Locking, Class II-IV for 2 Hitches

Locking Silent Hitch Pins – Let's Go Aero

Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 2-1/2 or 3 hitch receiver. Included twist clip secures pin and is easy to install and remove. Usable length is 4. Zinc finish resists corrosion.

Geny GH-099 Hitch Pin 5/8 x 4 Useable Length,Class IV & V Hitch Pin ,with Self Locking Twist Clip

Anti-Rattle Locking 2.5in Hitch Pin, Silent Hitch Pin