The Pink Stuff - Screen Dehazer & Degreaser – District Screen Supply

The Pink Stuff - Screen Dehazer & Degreaser – District Screen Supply

4.5
(169)
Write Review
More
$ 12.00
Add to Cart
In stock
Description

“The Pink Stuff” is a ghost image stain remover and degreaser that is designed for all ink systems.
GENERAL DESCRIPTION: “The Pink Stuff” is a viscous ghost/image stain remover and degreaser that is designed for all ink systems. This product removes stains with less noticeable odor and works better than most paste stain removers. “The Pink Stuff” can be used for degreasing and wetting all types of screen fabrics, including polyester, nylon, and stainless steel. “The Pink Stuff” leaves the fabric free of oils, contaminants, and residues which will ruin the emulsion coating. “The Pink Stuff” will reduce the incidence of “pin-holes” and “fish-eyes” when coating your screen with emulsion. “The Pink Stuff” is perfect for use on brand new fabric (mesh). Its’ micro-particles will prepare new mesh for production. Product Advantages: Easy to use Biodegradable / Drain Safe Pleasant odor Low VOC (Volatile Organic Compound) High Load Capacity to Reduce Usage Non-Hazardous / Non-Corrosive Mesh Safe Contains a Proprietary Mesh Protector Ideal for use on new fabric PRODUCT INFORMATION: Tech Data Sheet | Safety Data Sheet APPLICATION: Before using remove all ink residue and emulsion from the screen. Brush product on the ink side of a WET screen. Agitate on both sides of the screen with a brush or pad and set aside for approximately 1 to 10 minutes. High pressure water rinse, spraying from the bottom to top, on the print side of the screen. Reverse screen and high pressure rinse, then use low pressure water and flood rinse the complete screen. Allow screen to dry before coating. AVAILABLE SIZES: Quart, 5 Gallon  

CCI - screen-printers-resource

The Pink Stuff, Supplies, Equipment, Advice

CCI - screen-printers-resource

CCI The Pink Stuff Dehazer and Degreaser

CCI - screen-printers-resource

The Pink Stuff

Ecotex silk screen degreaser/dehazer is nonhazardous and safe for all mesh types. Screen printing degreaser and screen reclaimer is a great ghost remover. A clean silk screen is the best way to get a good coat of emulsion.

Ecotex Hyper Haze Degreaser- Ghost Remover – Screen Printing Supplies Gallon - 128oz

Hot Stuff Degreaser – Williams Distributing

CCI - screen-printers-resource

Ecotex Liquid Haze Screen Printing Degreaser/Dehazer Pint - 16oz