Swirl Clamshell for Wax Melts – Craftastik

Our clamshells are manufactured in the U.K. and are made of 500 micron plastic. Not only are they 100% recyclable they are also made with 88% recycled plastic. Recycling PET gives a slight tint to the product and depending on the source, you may notice a grey or blue impression however this will in no way detract away
Our clamshells are manufactured in the U.K. and are made of 500 micron plastic. Not only are they 100% recyclable they are also made with 88% recycled plastic. Recycling PET gives a slight tint to the product and depending on the source, you may notice a grey or blue impression however this will in no way detract away from your finished product. Each box has 54 grams of wax at full capacity.Approx measurements for a closed clamshell are 105 x 95 x 17mm's. INSTRUCTIONS: When pouring into pots, make sure your wax temperature is cool and pour slowly. We recommend your wax is no hotter than between 65°C and 70°C but ideally between55°C and 60°C, anything above this will melt the pots or find any weak spots. Pour a small amount (5mm) into each individual pot first and allow to start to set, this will check for any flaws. If all is ok, continue to slowly fill the pot. This will minimise the risk of wax spillages. If you see any leakage from the small pour, pop the pot to one side and when the wax is set remove for re use. Please notify us immediately if any problems occur. DISCLAIMER: PLEASE ensure your wax is at the right temperature which we recommend is between 55°C and 60°C. Wax that is too hot will melt the pot or find any weak spots. ALWAYS pour on a protected surface. ANY pots that leak will seal rapidly, as long as the wax is poured at the correct temperature, therefore loss will be minimal. DO NOT discard any spilled wax. Once the pot is set, any spilled wax can be melted down and poured back in the top. IF you have faulty, unusable pots, please retain for our inspection. DO NOT discard pots until contacting us first.

Wax Melt Clamshell Display Tray – Cindarn Packaging

Wax Clamshells – Maple & Wattle

Ozzy supplies 30 pcs Kraft Box with Crystal Clear

Wax Melt Clamshell - 1.75 oz 5 Section Snap Bar – Cindarn Packaging

DGQ Wax Melt Molds - 125 Packs Clear Empty Plastic Wax

Matte Style Tart Molds - California Candle Supply

Jucoan 100 Pack Plastic Wax Melt Clamshell Mold, 6

Our single cavity clamshell holds approximately 1 oz of wax and are made out of PET material. They are great for making sample wax or tart melts and

Single Cavity Clamshell Molds | For Wax Melts

High quality molds. They hold approximately 2.4 ounces of wax and each cavity is approximately 1 cube, Two piece molds. Perfect for all types of wax

Matte Black Two Piece Luxurious 6 Cavity (2 Piece - Not Clamshell) molds for wax melts or soaps

All come in packs of 10. All are made with PET plastic and are fully recyclable with a high recycled content. Clam Shells are ideal for making your

LiveMoor Wax Melt Clamshells / Packaging - Packs of 10