System Three G-2 Epoxy Glue Kit, 12 oz.

For over 35 years, G-2 has been an excellent epoxy adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine yacht joinery. Use G-2 for both interior and exterior applications as well as below the waterline. G-2 can be mixed in small or large batches, has a long pot life and cures overnight.

A two part epoxy coating and laminating resin for use in marine and woodworking applications. Use as a sealer, topcoat, saturation coat, or tie-coat.

System Three F1000K38 Amber Cold Cure Kit, 12 oz. Bottle

Stone Seam Pro 1000 Clear Flowing Adhesive - Chemical Concepts

Epoxy Laminating Resin 2:1- 1.5 Quart Kit- Medium Speed

System Three Quick Cure 15 Epoxy sets in 15 minutes. This makes it perfect for those wanting a faster set time for larger projects or just needing extra time for multiple glue-ups, fitting and clamping. Two-bottle kit (hardener and resin) with an easy 1-to-1 mixing ratio makes it hard to mess up. Be advised heat or lack of can affect cure time, but quality ingredients enable it to come pretty close to 15 minutes, so there arent any surprises when using it.

System Three 1010K10 Quick Cure 15, Kit, 1/2 Pint, Amber

Simpson Strong-Tie SET-3G High-Strength Epoxy Adhesive w/Nozzle 8.5oz

SET3G56 High-Strength Epoxy Adhesive

Blade Pro Epoxy Adhesive is a two-component, high-performance glue designed specifically for the knife maker. This state of the art adhesive forms super tough, flexible bonds to wood, Micarta, G10, and other composites. Tenacious bonds are developed to non-ferrous metals, as well as stainless, and carbon steel. Blade Pro Epoxy Adhesive is low in viscosity and is easy to spread. Because of its lower viscosity, it is suitable for both full and hidden tang applications.

System Three T32607 - Blade Pro Epoxy Adhesive, Pint Kit

T-88 Structural Adhesive

Blade Pro Epoxy Adhesive is a two-component, high-performance glue designed specifically for the knife maker. This state of the art adhesive forms super tough, flexible bonds to wood, Micarta, G10, and other composites. Tenacious bonds are developed to non-ferrous metals, as well as stainless, and carbon steel. Blade Pro Epoxy Adhesive is low in viscosity and is easy to spread. Because of its lower viscosity, it is suitable for both full and hidden tang applications.

System Three T32606 - Blade Pro Epoxy Adhesive, 4 oz. Kit

Simpson SET-3G is a high-strength epoxy adhesive that's been formulated for anchoring threaded rod and rebar doweling in cracked and uncracked concrete. The new SET-3G epoxy has a higher temperature range than previous SET epoxies for better performance and consistency. The SET3G56 comes with 56 oz. side-by-side cartridge and works with EDTA56P pneumatic epoxy adhesive dispensing tool. The EMN22i mixing nozzle is sold separately.

Simpson Strong-Tie SET3G56 56-oz. High-Strength Epoxy Adhesive