Chem-Set Stone Seam Tape – 1″ x 200′ Roll - Chemical Concepts

4.5

(120)

Write Review

$ 61.99

Add to Cart

Qty

In stock

Description

Stone Seam Tape is part of an innovative finishing system for deck seams. Installers often spend a lot of time and energy removing excess adhesive from their joints with a razor blade, going back and forth over the length of the seam over and over shaving a little bit of glue with each pass. With the Stone Seam Tape, much of this time is eliminated, using the tape to "squeegee" out most of the excess before the glue is dry.Stone Seam Tape comes in a 1" x 200' roll. It has a glossy side and a matte side which transfers to the joint allowing you to create the right finish for high gloss or leathered/textured surfaces. Using Stone Seam Tape is easy. Simply -- Apply Stone Seam adhesive to the joint and pull it togetherCut a length of tape to fit your seamPlace the tape on the surface (choose gloss or matte side depending on the surface)Use a metal or plastic razor to "squeegee out" as much excess adhesive as possibleAllow to cure until nearly hardened. The glue should be dry to the touch but still flexibleRemove the tapeHolding the razor at a 45° angle, remove excess adhesive on the surface. It should come off easily in long sectionsYour seam is complete and flush with the surface without all the scraping Stone Seam is a two-part methacrylate, clear acrylic seaming adhesive designed for the inconspicuous bonding of various substrates, including hard surface products such as granite, engineered stone, quartz, marble, cultured marble, glass, sintered stone, porcelain, and various ceramic surfaces with generally no preparation effort.