Designed for interior and exterior applications (Waterproof).
Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time, and lower application temperature. Titebond III is non-toxic, solvent free, and cleans up with water (safer to use than traditional waterproof wood glues). It provides strong initial tack, sands easily without softening, and is FDA approved for indirect food contact (cutting boards). Ideal for both interior and exterior applications.
Passes ANSI/HPVA Type I water-resistance
Waterproof formula that cleans up with water
Superior strength - Strong initial tack
Designed for interior and exterior applications
Longer open assembly time
Lower application temperature
Unaffected by finishes
FDA approved for indirect food contact (Non-toxic)
Physical Properties (Typical)
Type: Advanced Proprietary Polymer
State: Liquid
Color: Tan
Dried film: Light brown
Solids: 52%
Viscosity: 4,200 cps
pH: 2.5
Calculated VOC: 0.0105 g/L
Weight/gallon: 9.22 lbs.
Chalk temperature*: Approx 45°F
Flash-point: >200°F
Freeze/thaw stability: Stable
Storage life: 24 months in tightly closed containers below 75°F
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Application Guidelines
Application Temperature: Above 47 °F
Open assembly time: 8 to 10 minutes (70°F. / 50% RH)
Total assembly time: 20 - 25 minutes (70°F. / 50% RH)
Minimum required spread: 6 mils (typical), or 250 square feet per gallon.
Required clamping pressure: Enough to bring joints tightly together (generally 100-150 psi for softwoods, 125-175 psi for medium woods, and 175-250 psi for hardwoods)
Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader, or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Bonding Strength (ASTM D-905 Test with Hard Maple)
Temperature
Strength
Wood Failure
Room Temperature
4,000 psi
57%
150°F. Overnight
800 psi
0%
Limitations
Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 45°F. Store product below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exterior doors or exotic and oily woods, please contact Titebonds Technical Support Team at 1-800-347-4583. Read MSDS before use. Keep from freezing. Keep out of reach of children.
Available Sizes
Part #
Size
UPC
Case Qty.
1412
4 Oz. Bottles
037083014129
12
1413
8 Oz. Bottles
037083014136
12
1414
16 Oz. Bottles
037083014143
12
1415
1 Quart Bottle
037083014150
6
1416
Gallon Jug
037083014167
2
14109
2.15 Gallon ProJug
037083141092
1
1416
5 Gallon Bucket
037083014174
1
1418
55 Gallon Drum
N/A
1
Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes
Titebond III Ultimate Wood Glue - Quart
Titebond 1415 III Ultimate Wood Glue, 32-Ounce Bottle,Tan, 1 Qt
Download the full catalog - Schaff Piano Supply Co.
White Square Neck Puff Sleeve Bodycon Dress Party Dress
Titebond III Ultimate Wood Glue, 8 Oz (1413) by Titebond
White Square Neck Puff Sleeve Bodycon Dress Party Dress
White Square Neck Puff Sleeve Bodycon Dress Party Dress
Titebond III Ultimate Wood Glue, 8 Oz (1413) by Titebond
Titebond III 1416 Ultimate Wood Glue, Gallon Jug : Wood Glues
White Square Neck Puff Sleeve Bodycon Dress Party Dress