Tumbler Media - Pyramid Green Shots – ZAK JEWELRY TOOLS

Formulated for very fine surface conditioning. Low R.M.S. finishes are commonly achieved. Plastic medias are widely used in the precision metal industries. Also due to fine surface finishes achieved, parts are prepared for preplate, pre-anodize, or decorative polishing. Green (light cut). Density - 55 lbs. / Cu. Ft. So
Formulated for very fine surface conditioning. Low R.M.S. finishes are commonly achieved. Plastic medias are widely used in the precision metal industries. Also due to fine surface finishes achieved, parts are prepared for preplate, pre-anodize, or decorative polishing. Green (light cut). Density - 55 lbs. / Cu. Ft. Sold per pound.

304 Stainless steel tumbling media is rust and corrosion resistant and ABLE to stand up to strong compounds. Using a Stainless steel media is

2 LB 1/8 Stainless Steel Tumbling Media Shot Jewelers Mix 4 Shapes Tumbler Finishing

Products – ZAK JEWELRY TOOLS

Mix Includes a 1/2 pound each of the following: 0.047 Diameter by 0.255 Length Pin Media 1/8 Stainless Steel Diagonals 1/8 Stainless Steel

2 LB 1/8 Stainless Steel Tumbling Media Shot Jewelers Mix 4 Shapes Tumbler Finishing

Shape: pyramid, 1/4 x 1/4” x 1/4” , Density: 60 lbs. per cu. ft. Approximately 320 grit, 3:1 Ratio of Media to Material Use liquid compounds or water

1/4 Inch Green Plastic Resin Pyramid (Approx 320 grit) Tumbling or Vibratory Media 1 lbs / 0.45 kg | Includes a (Clean, Dry and Store) Bag | for use

1 lb Stainless Steel Jeweler's Polishing Burnishing Media Shot Mix Vibratory Tumblers (Balls, Cross, Pins, Satellite Shapes)

Jewelry Tools & Supplies – ZAK JEWELRY TOOLS

1/4 Pyramid-Shaped Green Resin Vibratory Tumbler Media - 1 Lb, MEDIA-0002

Simond Store Stainless Steel Tumbling Media Shot for Jewelry Tumblers to Polishing & Burnishing Gold, Silver, and Copper Jewelry - Mix 4 Shapes (2 LBS (1 Pack)) : Arts, Crafts & Sewing

Dark Green Epoxy Plastic Media - The Rock Shed

Zak Designs 40 Ounce Stainless Steel Tumbler, Key Lime

Shape: pyramid, 1/4 x 1/4” x 1/4” , Density: 60 lbs. per cu. ft. Approximately 320 grit, 3:1 Ratio of Media to Material Use liquid compounds or water

1/4 Inch Green Plastic Resin Pyramid (Approx 320 grit) Tumbling or Vibratory Media 1 lbs / 0.45 kg | Includes a (Clean, Dry and Store) Bag | for use

Spreading Everyday Smiles for Over 45 Years

Spreading Everyday Smiles for Over 45 Years