STL file Vif D'or HARRY POTTER 🎨・3D printing idea to download・Cults

This vif d'or is made up of three parts: the body/sphere, the right wing and the left wing in symmetry. Print parameters : Sphere : - Materials: ABS (for acetone smoothing) - Layer thickness: 0.12 mm - Filling: 20 - Contour/perimeter shells: 3 (For good surface finish after acetone smoothing) - Generate a small area of support under the gold snapper for good printing. Wings: - Materials: ABS - Nozzle diameter: max 0.4 mm (Modify the extrusion width parameter (max 0.4 mm) if the feather hooks do not print) - Layer thickness: 0.2 mm - Filling : 100 -------------------------------------------------------------------------------------- Post treatment : Sphere : - Remove supports, deburr if necessary - Place in oven to smooth outer surfaces - Sand lightly if any areas remain unsmoothed - Paint the sphere with gold paint. I used gold spray paint. Wings: - Deburr if necessary - Lightly sand both sides - Heat the front structure with a hair dryer to give it the desired curvature. - Paint the wings Finally, assemble and glue the two wings to the sphere in the holes provided. Drill the holes to the correct diameter if necessary. ___________________________________________________ This snitch is made up of three parts: the body / sphere, the right wing and the left wing in symmetry. Print settings : Sphere: - Materials: ABS (for acetone smoothing) - Layer thickness: 0.12mm - Filling: 20% - Contour / perimeter shells: 3 (For a good surface condition after smoothing with acetone) - Generate a small area of support under the snitch for a good impression. Wings: - Materials: ABS - Nozzle diameter: max 0.4 mm (Modify the extrusion width parameter (max 0.4 mm) if the feather grips do not print) - Layer thickness: 0.2 mm - Filling: 100% -------------------------------------------------------------------------------------- Post-processing Sphere: - Remove the supports, deburr if necessary - Put in an oven to smooth the exterior surfaces - Lightly sand if there are non-smooth areas - Paint the golden snake sphere. I used gold spray paint. Wings: - Deburr if necessary - Lightly sand both sides - Heat the front structure with the hair dryer to give it the desired curvature. - Paint wings Finally, assemble and glue the two wings on the sphere in the holes provided for this purpose. Drill the holes to the correct diameter if necessary.

Gambody STL files of Harry Potter for 3D Printing

Gambody STL files of Harry Potter for 3D Printing

Gambody STL files of Harry Potter for 3D Printing

Free STL file harry potter hogwarts hogwarts hogwarts 🏰・3D printable model to download・Cults

Harry Potter best free STL files for 3D printer・398 models to download・Cults

This vif d'or is made up of three parts: the body/sphere, the right wing and the left wing in symmetry., Print parameters :, Sphere :, - Materials

Vif D'or HARRY POTTER

Free STL file Wizard 👧・3D printable model to download・Cults

My version of Harry Potter 3D printable model and There are 2 types of files STL model size in 180 mm. easily can print out.

Harry Potter 3D print model

mate harry potter 3D Models to Print - yeggi