Altelix Weatherproof Vented Enclosure for Ring® Range Extender
Features
Designed to fit the Ring® Range Extender
Plug-and-Play Design, Easy to Install
Dual 3 Vents with Rain Shields to Expel Heat
Features a RF Transparent PVC Non-Metallic Equipment Mounting Plate
Pre-Wired 120VAC Power Outlet with 5 foot Power Cord
Includes Wall Mounting Hardware
NEMA Type 3R, 3RX / IP24 Rated
Weatherproof and UV Stable
Durable Polycarbonate + ABS Construction
Gasketed Lid Featuring a Tamper-Proof Locking Screw with Key and Provision for Padlock
Optional Pole Mount Kit Available
Applications
Protection of the Ring® Range Extender from Theft or Damage
Extend the Signal Coverage from the Alarm Base Station to Outdoor Locations
Concealment of Equipment
Deployment of Ring® Security System to Remote Locations
Extend Signal Coverage to Outdoor LocationsThe Altelix Ring Range Extender Enclosure is a vented weatherproof enclosure designed to provide added security from vandalism and protection from harsh environments, while allowing ventilation for the Ring® Range Extender. It features two 3 inch air vents with rain shields and screens.Rugged Polycarbonate + ABS ConstructionThis sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24. Plug and Play SetupThe Altelix Range Extender enclosure provides easy plug-n-play installation. Once the enclosure is mounted, plug the Ring® Range Extender into the pre-wired 120VAC power outlet. Then plug the enclosure's 5 foot power cord into a 120VAC power outlet and you are up and running.RF Transparent DesignThe non-metallic design of the enclosure and equipment mounting plate is RF transparent and will not interfere with the wireless signal range or coverage pattern of the Ring® Range Extender.Complete with Cable Grommets and Glands and Wire Management StrapsFor convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more. MountingThe enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.Ring® is a trademark or registered trademark of Technologies, Inc.
Technical Specifications
Material
Polycarbonate + ABS
Available Colors
Gray, Black, Light Ivory, OD Green
Voltage
120VAC
Max Load
10A @ 120VAC
Outer Dimensions(Height x Width x Depth)
13.4 x 11.5 x 6.3 Inches (340 x 293 x 160 mm)
Inner Dimensions*(Height x Width x Depth)
9.5 x 8.0 x 3.8 Inches (241 x 203 x 98 mm)
Mounting Plate Material
0.25 in. (6.4mm) PVC
Weight
4.1 lbs. (1.8 kg)
Power Cord Length
5 Feet (1.5m)
Ratings
NEMA Type 3R, 3RX / IP24
Flame Rating
Meets UL94-V0
Compatible Ring® Model
Ring® Range Extender(Model 5AT2S8)
*Interior dimensions represent maximum space available for equipment.
NEMA Ratings and IP Equivalency ChartThis chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.
Downloads
Data Sheet Installation Guide Drill Template for Wall Mounting
Same Day Shipping - Click Here for details.
Need a pole mount kit, an extra set of enclosure keys or something else? Click on ADD TO CART below to see all the available accessories for this enclosure.
Features Dual 3 vents to help expel heat 120VAC duplex outlet Heavy duty continuous seam welded 18 gauge steel construction Includes blank zinc
Altelix 24x16x12 Vented Steel Weatherproof NEMA Enclosure with 120 VAC Outlets and Power Cord
Altelix 24x24x24 19 Wide 6U Rack NEMA 4X Steel Weatherproof Enclosure with Single 120 VAC Duplex Outlet and Power Cord - Altelix
Features, (2) 3 vents to help expel heat, Heavy Duty Continuous Seam Welded 18 Gauge 304L Stainless Steel Construction, Brushed Natural Finish,
Altelix 24x24x16 Vented 19 Wide 6U Rack Stainless Steel Weatherproof NEMA Enclosure
Features Two (2) 3 Vents and a Thermostat Controlled Cooling Fan Features a 1.5mm Thick Finished Aluminum Equipment Mounting Plate with 120VAC Power
Altelix 13x10x4 PC+ABS Weatherproof Vented Utility Box NEMA Enclosure with Cooling Fan, 120 VAC Outlet & Power Cord
Altelix 28x24x16 Vented Steel Weatherproof NEMA Enclosure with Steel Equipment Mounting Plate - Altelix
Altelix 14x12x10 Fiberglass Vented & Heated Weatherproof NEMA Enclosure with Cooling Fan, 200W Heater, 120 VAC Outlets & Power Cord - Altelix
Altelix 16x12x12 Vented Steel Weatherproof NEMA Enclosure with
Altelix 14x12x10 Fiberglass Vented Weatherproof NEMA Enclosure with Blank Aluminum Mounting Plate - Altelix
Altelix 28x24x16 Vented Steel Weatherproof NEMA Enclosure with Steel Equipment Mounting Plate - Altelix
Altelix Weatherproof Vented WiFi Enclosure for eero® 6 and
Altelix 14x12x8 Fiberglass Weatherproof Vented NEMA Enclosure with 120 VAC Outlets
Altelix 14x12x10 Fiberglass Vented & Heated Weatherproof NEMA Enclosure with Cooling Fan, 200W Heater, 120 VAC Outlets & Power Cord - Altelix
Altelix 24x16x9 Vented Fiberglass Weatherproof NEMA Enclosure
Altelix 14x12x8 Fiberglass Weatherproof Vented NEMA Enclosure with
Altelix Weatherproof Vented Enclosure for Alarm.com® Cellular Z-Wave Hub and PointCentral® Hub with 120VAC Outlets and Power Cord
Altelix Weatherproof Vented Enclosure for Alarm.com® Z-Wave Hub and PointCentral® Hub with 120VAC Outlets and Power Cord