Gelcoat can be used to build or repair surfaces of body parts & boat hulls & to remove scratches! Combine gel coat with MEKP at 1.5%. Mix thoroughly to ensure the product is properly catalyzed Restorer is available transparent, but can be dyed with suitable pigment available at our store. Restore & Protect boat paint from weathering, moisture & chemical exposure. Covers approximately 20 sq. ft. per quart, or 80 sq. ft. per gallon With 2oz of MEK-925. White Gel Coat to be used over fiberglass surfaces. This product is designed to cure to a tack-free finish. Restore scratch on boats, canoe, kayaks, bathtub, skate board, with clear or use coloring agents. Features: ✴️ Contains No-Wax Hardener included Approximate Coverage 20 sq. ft. ✴️ Polyester Gel-Coat White No-Wax One Gallon Iso Polyester base. ✴️ UV stabilized for durable weather properties. ✴️
With 2oz of MEK-925. White Gel Coat to be used over fiberglass surfaces. This product is designed to cure to a tack-free finish. Restore scratch on boats, canoe, kayaks, bathtub, skate board, with clear or use coloring agents.
Features:
✴️ Contains No-Wax Hardener included Approximate Coverage 20 sq. ft.
✴️ Polyester Gel-Coat White No-Wax One Gallon Iso Polyester base.
✴️ UV stabilized for durable weather properties.
✴️ Use no less than 1/2 % MEKP, no more than 2% MEKP. Mix thoroughly for 2 minutes.
✴️ Pot life is approximately 15-25 minutes at 77 degrees Fahrenheit. Do not use under 60 degrees Fahrenheit.
✴️ Complete cure is approximately 45 minutes to 4 hours.
Method:
✴️ Clean surface and wipe clean with a dry rag.
✴️ Sanding is required between coats where applicable.
✴️ Apply with a Roller or Brush or cup gun application. Apply approximately 20 mils, approximately the thickness of a dime, of gel coat.
✴️ One gallon of gel coat paste will cover between 40-80 square feet at 20-25 mils.
✴️ May add up to 4 % pigment, normally 1oz. per quart, or 4oz. per gallon by volume.
✴️ May be thinned with Styrene, adding no more than 10% by volume. Clean up with Acetone.
Benefits: It is a popular material to use when restoring shine to older fiberglass. No wax gelcoat is used when multiple layers of coats are used on a single task. This speeds up the process. However, the last gelcoat must have wax. The non-wax gelcoat will remain sticky until the wax is added. These have to be filled up several times, as the material is subject to shrinkage during curing. High-quality products are usually slightly cheaper especially when purchased in larger quantities. Get Professional maintenance, ideal with polishing, coloring and as sealant. Buff and polish your new gel coat to a professional-looking finish.
Gelcoat - TRUE COMPOSITES
Hi-Bond White Gel Coat No Wax w/ Hardener
Building Open-Molded Production Tooling - Explore Composites!
White Gelcoat No Wax - TRUE COMPOSITES
White Gel Coat - Polynt 943
Fiberglass Warehouse Gel Coat – 1 Gallon White Gelcoat
True Composites White Gelcoat No Wax-Isophthalic NPG Fiberglass
What's causing my edges to be white? I'm assuming it's my white
Gelcoat repair: How to make an invisible repair - Practical Boat Owner