ZYP Coatings (formerly known as MR-97) is a high temperature, anti-stick release agent for glass forming that works on most common ceramic and metal molds. It is inert and yields 97% boron nitride at 1800° F. 13 oz. spray can. Directions Remove old primer residue with a stiff, nylon kitchen or tooth brush. Shake can well. Hold can and mold vertically, 10 to 12 inches apart. Depending on the size of the mold, apply a two-second or longer coat in a sweeping pattern over the entire mold cavity. Do not saturate. Wait five minutes. Using the same process, apply a second coat. Wait 15 minutes. Do not scratch primer surface when filling. After firing, wash residual from glass casting. Brush out mold. Only a single coat of MR-97 is needed before each subsequent firing.
Boron Nitride Aerosol Lubricoat is - ZYP Coatings, Inc.
Product Details
Glass Fusing Supplies
Everything You Need To Know About Boron Nitrite Mold Release – Art Glass Love by Wardell
Buy Slide Hi-Temp Mold Release 1800 Online Senegal
Anti-Stick: Molten Al, Mg, & Zn, Hot-Pressing, Glass Forming, Weld Spatter, Braze Stop-Off High-temperature Lubrication: Extrusion, Superplastic
BN Aerosol Lubricoat, 1 can (13 oz. Aerosol can) - Release Agent, High-Temperature Lubricant
ZYP Boron Nitride Mold Release - 13 Oz.
Use only Boron Nitride on the mold for all future firings to ensure your art releases from the mold. After a few firings, a soft bristle brush can be
Zyp Boron Nitride Spray Ceramic Mold Release - 12 Oz
LOWER FRICTION MK-hBN-SP-13OZ Boron Nitride Aerosol India
ZYP Boron Nitride Mold Release - 13 Oz.
BN Glass Release Spray - ZYP Coatings
Ideal for glass slumping and fusing -- avoid broken molds & stuck castings! Used by artists around the world. Useful for extrusion, aluminum, and
ZYP Coatings Boron Nitride Aerosol Lubricoat (Glass Mold Release) / 2 Pack