These handy aluminum spacers fit between the frame and drive-side bottom bracket cup (cup must have a flange or lip) and can be used to dial in your chainline or to overcome drive side crank arm clearance issues, on square taper, Octalink and external bearing bottom brackets for 24mm cranks. You probably (hopefully?) a
These handy aluminum spacers fit between the frame and drive-side bottom bracket cup (cup must have a flange or lip) and can be used to dial in your chainline or to overcome drive side crank arm clearance issues, on square taper, Octalink and external bearing bottom brackets for 24mm cranks.
You probably (hopefully?) already know this, but moving your crank over to one side will also decrease your crank arm clearance on the other side.
They can also be used to increase the chainline measurement of a cog or freewheel, should you ever really feel a weird need to futz around with that.
DO NOT put a spacer between your cog and lockring, as this will reduce the number of lockring threads engaged and decrease the friction needed to properly secure these components.
All this being said, BE CAREFUL WITH THESE. Using them incorrectly can seriously damage your bike and then you'll email us about being all bummed out, and we won’t care because we told you so.
Sold individually.
Not for use on Sram GXP bottom brackets.
Yes, we know Sram Omniums are cursed and have clearance problems on some frames. Unless you're a hack and want to ruin your bottom bracket bearings, and possibly your left crank arm, adding spacers is not the solution. Frig off, Reddit.
• 1mm, 1.5mm or 2mm thickness
• inner diameter: 35mm
The Alter lockring is machined from 7mm thick 7075 T6 aluminum and installs using a Shimano/Sram 16-notch outboard bearing bottom bracket tool (like
Alter Pista lockring
Bike Bottom Brackets, Bike Components, Cycling
With all the different bottom bracket styles, frame manufacturers, and component makers out there you’re bound to run into situations where cup
Bottom Bracket Cup Spacers
Small Part Worldwide Cyclery
Bottom Brackets – Retrogression
19MM MID/AMERICAN BOTTOM BRACKET CONE SPACER SET – Profile Racing
Phil Wood Outboard Bottom Bracket w/ GXP adapter – Retrogression
Developed for use by Olympic and World Championship medalist velodrome racers, Sugino 75 DD2 crank arms feature a super stiff IDS24 splined chromoly
Sugino 75 DD2 crank arms & bottom bracket
Crane Suzu Mini headset spacer-mount bell – Retrogression
Small Part Worldwide Cyclery
Bottom bracket spacers are used to adjust the spindle position to add extra clearance, or to fine tune chainline. For example, if your inner chainring
Bottom Bracket Spacer
Bottom Brackets - Go-Ride Bicycle Shop
Bottom Brackets - Go-Ride Bicycle Shop
In addition to being strong and cost efficient like the Andel Standard Track crankset, the Deluxe Track features a very stiff two-piece integrated
Andel Deluxe Track fixed gear crankset w/ bottom bracket
How many spacers should I install on my bottom bracket?