The 30° Elbow Kit is used to get past rafters or away from an obstruction like plumbing, HVAC, or the roof peak. Up to 2 lengths of chimney pipe (for a maximum run of 72 in. between elbows) can be added between elbows to allow for necessary spacing. An Elbow Strap is included and helps support the weight of the offset from the elbows. If your installation includes two lengths of pipe between the elbows a second Elbow Strap (sold separately) is required. Inner wall 0.019 in.
Shasta Vent 6 Dia. 15 deg Elbow Kit for Class A
All-Fuel Chimney - SuperVent
The 1/12-6/12 roof flashing provides leak proof penetration of the roof. Our flashings can be used in both vented and fully sealed applications (including sealed chase installations). A storm collar, sold separately, is required to seal the flashing.
Allfuelhst Roof Flashing 1/12 to 6/12 for 6 Chimney Pipe
The 30° Elbow Kit is used to get past rafters or away from an obstruction like plumbing, HVAC, or the roof peak. Up to 2 lengths of chimney pipe (for a maximum run of 72 in. between elbows) can be added between elbows to allow for necessary spacing. An Elbow Strap is included and helps support the weight of the offset from the elbows. If your installation includes two lengths of pipe between the elbows a second Elbow Strap (sold separately) is required. Inner wall 0.019 in.
AllFuel HST 30 Degree Elbow Kit for 6-Inch Inner Diameter Chimney Pipe
The 30° Elbow Kit is used to get past rafters or away from an obstruction like plumbing, HVAC, or the roof peak. Up to 2 lengths of chimney pipe (for a maximum run of 72 in. between elbows) can be added between elbows to allow for necessary spacing. An Elbow Strap is included and helps support the weight of the offset from the elbows. If your installation includes two lengths of pipe between the elbows a second Elbow Strap (sold separately) is required. Inner wall 0.019 in.
AllFuel HST 30 Degree Elbow Kit for 6-Inch Inner Diameter Chimney Pipe
Ventis Double Wall Black Stove Pipe 30 degree fixed elbow - 6
The 6 Class-A Wall Thimble is used for through-the-wall chimney installations. It protects the wall as the chimney passes safely through to the outside and provides a finished look to the framed opening on the inside. The Wall Thimble can adjust to accommodate walls from 6 to 10 inches thick.
Allfuelhst Wall Thimble for 6 inch Diameter Chimney Pipe
AllFuel HST 6 Adapter Chimney Pipe Accessory Kit for Installation
SuperVent 11-Piece Chimney Pipe Accessory Kit for Wall Support in
Supervent® 6 ID x 36 Class A Double Wall Vent Pipe at Menards®
Through The Wall Kit for 6 Inner Diameter Chimney Pipe with Spark
Cathedral Ceiling Kit for 6 Chimney Pipe with Spark Guard
AllFuelHST 45 Degree Elbow for 6 Single Wall Stove Pipe - ComfortBilt
SuperVent 7-Piece Chimney Pipe Accessory Kit for Installation in the
AllFuel HST 6 x 48 304 Stainless Steel All Fuel Class-A Double