The 1/12-6/12 roof flashing provides leak proof penetration of the roof. Our flashings can be used in both vented and fully sealed applications (including sealed chase installations). A Storm Collar, sold separately, is required to seal the flashing. Construction Material Our roof flashings are made of 304 stainless s
The 1/12-6/12 roof flashing provides leak proof penetration of the roof. Our flashings can be used in both vented and fully sealed applications (including sealed chase installations).
A Storm Collar, sold separately, is required to seal the flashing.
Our roof flashings are made of 304 stainless steel to deliver superior safety and performance.
Certified and listed to the UL 103HT standard and designed for appliances that are listed for use with a 2100 Degree Fahrenheit High Temperature chimney system. It can be used with wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, pizza ovens and other residential heating appliances fueled by wood, gas, coal or oil.
Note: Do not use with forced draft, positive-pressure appliances.
The UL 103HT chimney is designed and tested for maximum continuous use at 1000 degrees Fahrenheit. UL certification requires a stringent and rigorous test including a one hour burn at 1400 degrees Fahrenheit and three - ten minute burns at 2100 degrees Fahrenheit.
Always keep at least a 2-inch clearance between chimney pipe and any combustible materials.
DuraVent 6DP-12SS DuraPlus 6 in. x 12 in. Stainless Steel Triple-Wall Chimney Stove Pipe
SuperVent 5-Piece Chimney Pipe Accessory Kit for Ceiling Support in the Chimney Pipe Accessory Kits department at
Roof Support Kit for 6 Inner Diameter Chimney Pipe – Dominusheat
Roof Support Kit for 6 Inner Diameter Chimney Pipe
All-Fuel Chimney - SuperVent
Selkirk Metalbestos Class A Insulated Chimney Pipe - Rockford Chimney
How To Install a Chimney Through a Metal Roof
Our through the wall kit should be used whenever venting through the ceiling is not an option or is not desired. Note: venting straight up through the ceiling is always recommended for the strongest possible draft. This kit includes all the components you need to connect the single wall stove pipe to Class-A double wall insulated pipe, pass through an exterior wall, make a 90 ° turn, and top off the installation with a chimney cap. To complete this kit purchase the lengths of 8 in.
Through The Wall Kit for 6 Chimney Pipe with Chimney Cap
The 1/12-6/12 roof flashing provides leak proof penetration of the roof. Our flashings can be used in both vented and fully sealed applications (including sealed chase installations). A Storm Collar, sold separately, is required to seal the flashing.
Allfuelhst Roof Flashing 1/12 to 6/12 for 6 Chimney Pipe
Wall support Chimney Pipe Accessory Kits at
The extended roof brace is used to help support the chimney where it extends more than 5 feet above the roof. Legs adjust from 65-130 inches and pivot at the ring and brackets to fit any roof pitch. An extended roof brace or other support must be used for every 5 feet of chimney above the roof (if your chimney extends 12 feet above your roof you need 2 roof support braces). Note: Extended Roof Brace does not support the weight of the chimney. It supports the lateral movement only.
AllFuel HST Extended Roof Brace for 6 Chimney Pipe
ALLFUEL HST AllFuel 6 in. 1/12 to 6/12 Pitch Roof Flashing for Double Wall Chimney Pipe BL.EV.RB-SHT6RF01 - The Home Depot
8 Selkirk Class A Chimney Pipe.
Chimney has been filling the supply and accessory needs of over 8,000 chimney sweeps hearth retailers masons and contractors for over 25 years. Chimney has the privilege of serving over 80% of the chimney professionals in America.Founded by Robert Daniels Sooty Bob in 1978 Chimney has grown from a one-man operation to a national network of six warehouses and a manufacturing plant. From its headquarters in Fairfield Iowa Chimney plays a major role in providing for the Chimney industry.
Selkirk Corporation JSC8AAF 8 inch SuperPro Flashing 0/12-6/12 Pitch with Storm Collar Galvalume