3D Puff HTV - 12 x 12 sheet - StarCraft Heat Transfer Vinyl

3D PUFF HTV - Black - 12" x 12"
StarCraft 3D Puff is a perfect material to give a 3D effect to any design. This multi-layered polyurethane HTV technology expands when heat pressed to become a soft puffed up look. Applies to: Cotton, Polyester, Cotton/Polyester Blends. Not suitable for us on nylon and other coated textiles.Finish: Matte/Flat/DimensionalCarrier: Polyester Application Instructions:  Time: 10-12 Seconds  Pressure: Medium to firm pressure  Peel: Warm 2nd Press: To maximize the 3D effect, remove protective (carrier, Parchment or non-stick sheet) and press a second time directly against the heat platen. Temperature: 285°F Time: 5-7 seconds Pressure: Medium to firm pressure*** Hang to dry is recommended to increase the longevity of the garment and heat transfer vinyl. Drying with heat may also shrink the garment and cause puckering of the heat transfer vinyl so caution is advised.Care/Wash InstructionsWait 24 hours before washing. No harsh detergents or bleach. Tumble dry low heat.***It is the nature of this product for Puff results and texture to vary. It is a good idea to perform a test swatch.Do not stretch 3D StarCraft PUFF as it is susceptible to cracks when stretched.

Gold Vinyl HTV, Gold Heat Press Vinyl

3d Puff Heat Transfer Vinyl

, VTS 3D Super Puff is a puff heat transfer vinyl that is easy to weed, easy to use, and only requires one press! :) , Actual width 9.75-10 ,

3D Super Puff Heat Transfer Vinyl | Puff HTV

Grey PARART 3D Puff Heat Transfer Vinyl (HTV)

20 PerfecPress Foam/Puff HTV Sheets, Printing Supplies

Siser Easy Puff - Purple - 12x12 Sheet

Starcraft Products - VIP Vinyl Supply

Craftables Black Puff Iron on Vinyl 25 ft. Roll

Craftables Black Puff Iron on Vinyl 25 ft. Roll

StarCraft SoftFlex HTV - Easter - 12 x 12 Color Pack